Did you do this while in X? You get different values, if you do this from
the command line while not in X.
As an example, mine says the same thing yours does, if I cat /proc/nv/card0
from the command line before starting X. However, if I do it in a shell from
within X, the AGP *is* enabled, and there is a driver name listed.
----- Original Message -----
From: "Nathan" <[EMAIL PROTECTED]>
To: "Jerry Sternesky" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, May 02, 2001 6:31 AM
Subject: Re: [expert] Mandrake 8 && GLX (Nvidia)
> Jerry,
>
> Thanks for trying to help with this, if I manage to fix this problem I'll
> probably give up Windows all together.
>
> > What is your agp status? Enabled or Disabled. and agp driver says
> > NVIDIA
>
> cat /proc/nv/card0 brings up the following -
>
> NVRM Version: 1.0-769
> Model: Riva TNT2 Ultra
> IRQ 11
> AGP status: Disabled
> AGP driver:
> Bridge: Ali M1541
> SBA: Supported [Disabled]
> FW: Unspoorted [Disabled]
> Rates: 2x 1x
>
> > I had to go into /etc/rc.sysinit and comment out the loading of agp to
> > allow the nvidia one to get loaded.
>
> in /etc/rc.sysinit there is no reference to AGP
>
> I'd be grateful for any ideas you might have,
>
> Nathan
>
> On Monday 30 April 2001 21:59, Jerry Sternesky wrote:
> > As root do a cat /proc/nv/card0
> >
> > What is your agp status? Enabled or Disabled. and agp driver says
> > NVIDIA
> >
> > You can also confirm which x is using by checking your
> > /var/log/XFree86.0.log. If it is the one from the kernel you need to
> > stop that from loading, so the nvidia one can get in there.
> >
> > I had to go into /etc/rc.sysinit and comment out the loading of agp to
> > allow the nvidia one to get loaded.
> >
> > Jerry
> >
> > On 30 Apr 2001 11:17:23 -0700, Todd Flinders wrote:
> > > I don't have help for your specific errors. But at
> > > least make sure you are running X 4:
> > >
> > > X -version
> > >
> > > And that NVidia loaded properly:
> > >
> > > lsmod
> > >
> > > If you are definitely running X 4.0.x and NVidia shows
> > > up in the list of modules, right back with specific
> > > information about your hardware and Linux
> > > distribution.
> > >
> > > Also, list what version of the nvidia drivers you are
> > > using.
> > >
> > > --- Nathan <[EMAIL PROTECTED]> wrote:
> > > > I have compiled and installed the Nvidia kernel &
> > > > GLX source code without any
> > > > problems. In fact everything seems to work for a
> > > > second or two, until the 3D
> > > > image freezes or X Windows crashes (depending on the
> > > > 'OpenGL' program I run).
> > > >
> > > > I have checked that GLX is loading correctly and
> > > > that there are no
> > > > conflicting libraries, have tried everything in the
> > > > Nvidia documentation, and
> > > > everything else I can think of. But X Windows
> > > > continues brings up the
> > > > following error (in its log) -
> > > >
> > > > RM failed to reinstate pixmap cache (I've also had
> > > > warnings such as - Open
> > > > APM failed & Failure reading EDID parameters for
> > > > head 0)
> > > >
> > > > I'd be very grateful if anyone with any idea of
> > > > whats going wrong could let
> > > > me know how to fix this. I have a Guillemot Max
> > > > Gamer Cougar Riva TNT2 M64
> > > > Card, and have tried a similar card by a different
> > > > manufacturer too, but had
> > > > the same problem. It works fine under Windows, but I
> > > > don't often need or want
> > > > to use Windows for reasons everyone on this list I'm
> > > > sure understands.
> > > >
> > > > Any help would be appreciated.
> > > >
> > > > Nathan Taylor
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Auctions - buy the things you want at great prices
> > > http://auctions.yahoo.com/
>
