My Ensonique SoundscapeVIVO sound card, which works perfectly under LM 7.2,
behaves strangely under LM 8.0
It is not detected by HardDrake, so I use sndconfig to install it. Sndconfig,
however, does not offer the correct mpu401 settings, so I edit
/etc/modules.conf to the correct values later and restart the sound system.
All works well until I reboot, then the startup fails with the following:
May 6 20:45:55 Blue8 kernel: ad1848/cs4248 codec driver Copyright (C) by
Hannu Savolainen 1993-1996
May 6 20:45:55 Blue8 insmod:
/lib/modules/2.4.3-20mdk/kernel/drivers/sound/ad1848.o.gz: init_module: No
such device
May 6 20:45:55 Blue8 insmod: Hint: insmod errors can be caused by incorrect
module parameters, including invalid IO or IRQ parameters
May 6 20:45:55 Blue8 insmod:
/lib/modules/2.4.3-20mdk/kernel/drivers/sound/ad1848.o.gz: insmod
sound-slot-0 failed
May 6 20:45:55 Blue8 modprobe: modprobe: Can't locate module
sound-service-0-0
May 6 20:45:55 Blue8 kernel: ad1848/cs4248 codec driver Copyright (C) by
Hannu Savolainen 1993-1996
May 6 20:45:55 Blue8 insmod:
/lib/modules/2.4.3-20mdk/kernel/drivers/sound/ad1848.o.gz: init_module: No
such device
May 6 20:45:55 Blue8 insmod: Hint: insmod errors can be caused by incorrect
module parameters, including invalid IO or IRQ parameters
May 6 20:45:55 Blue8 insmod:
/lib/modules/2.4.3-20mdk/kernel/drivers/sound/ad1848.o.gz: insmod
sound-slot-0 failed
May 6 20:45:55 Blue8 modprobe: modprobe: Can't locate module
sound-service-0-0
May 6 20:45:55 Blue8 modprobe: modprobe: Can't locate module sound-slot-1
May 6 20:45:56 Blue8 modprobe: modprobe: Can't locate module
sound-service-1-0
May 6 20:45:56 Blue8 modprobe: modprobe: Can't locate module sound-slot-1
May 6 20:45:56 Blue8 modprobe: modprobe: Can't locate module
sound-service-1-0
May 6 20:45:56 Blue8 kernel: ad1848/cs4248 codec driver Copyright (C) by
Hannu Savolainen 1993-1996
May 6 20:45:56 Blue8 insmod:
/lib/modules/2.4.3-20mdk/kernel/drivers/sound/ad1848.o.gz: init_module: No
such device
May 6 20:45:56 Blue8 insmod: Hint: insmod errors can be caused by incorrect
module parameters, including invalid IO or IRQ parameters
May 6 20:45:56 Blue8 insmod:
/lib/modules/2.4.3-20mdk/kernel/drivers/sound/ad1848.o.gz: insmod
sound-slot-0 failed
May 6 20:45:56 Blue8 modprobe: modprobe: Can't locate module
sound-service-0-3
The settings in /etc/modules.conf are correct, but restarting the sound
system produces the same errors. Running sndconfig again gets the sound
working. Using vi to correct the mpu401 settings and then restart the sound
system again, and all works (again) until next reboot.
A copy of the terminal session showing the above follows.
Any help would be appreciated.
Trevor
Session:
[root@Blue8 trevor]# sndconfig
... enter settings...
[root@Blue8 trevor]# cat /etc/modules.conf
pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start
alias usb-interface usb-uhci
alias scsi_hostadapter ide-scsi
alias eth0 ne2k-pci
alias sound-slot-0 ad1848
options sound dmabuf=1
alias midi mpu401
options mpu401 io=0x330 irq=9
options ad1848 io=0x530 irq=5 dma=1 dma2=0
[root@Blue8 trevor]# /etc/rc.d/init.d/sound restart
Loading sound module (ad1848) [ OK ]
Loading midi module (mpu401) /lib/modules/2.4.3-20mdk/kernel/drivers/sound/m
1.o.gz: Hint: insmod errors can be caused by incorrect module parameters, in
ing invalid IO or IRQ parameters
init_module: No such device
/lib/modules/2.4.3-20mdk/kernel/drivers/sound/mpu401.o.gz: insmod /lib/modul
.4.3-20mdk/kernel/drivers/sound/mpu401.o.gz failed
/lib/modules/2.4.3-20mdk/kernel/drivers/sound/mpu401.o.gz: insmod mpu401 fai
[FAILED]
[root@Blue8 trevor]# vi /etc/modules.conf
... edit settings...
[root@Blue8 trevor]# cat /etc/modules.conf
pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start
alias usb-interface usb-uhci
alias scsi_hostadapter ide-scsi
alias eth0 ne2k-pci
alias sound-slot-0 ad1848
options sound dmabuf=1
alias midi mpu401
options mpu401 io=0x320 irq=10
options ad1848 io=0x530 irq=5 dma=1 dma2=0
[root@Blue8 trevor]# /etc/rc.d/init.d/sound restart
Loading sound module (ad1848) [ OK ]
Loading midi module (mpu401) [ OK ]
[root@Blue8 trevor]#
