On Mon, 2 Jul 2001 09:20:23 +1000, Nathan Callahan wrote:
> Hi,
>
> Have to go shortly so I can't take the time to look up things.
>
> I recall that in order to get the bttv chip working, you need to pass
> the module some parameters.
>
> The readme in the documentation subdir of the kernel sources is kind of
> handy.
>
>
--------------------------------------------------------------------
Been there, and put the module options for bttv and tuner required into
modules.conf as
shown below.
Thank you!
Jay
---------------------------------------------------------------------
> On Monday, July 2, 2001, at 07:52 AM, JR Lefty wrote:
>
> > HELP!,
> >
> >
> > ok, heres the details:
> >
> > lsmod results.
> > --------------------------------------------------------------------
> >
> > msp3400 13904 0 (unused)
> > tuner 4624 0 (unused)
> > bttv 57648 0 (unused)
> > i2c-algo-bit 7200 0 [bttv]
> > i2c-core 12720 0 [msp3400 tuner bttv i2c-algo-bit]
> > videodev 4704 0 [bttv]
> >
> > /var/log/messages info.
> > ---------------------------------------------------------------------
> >
> > Jul 1 16:18:11 jrh6pc kernel: bttv: driver version 0.7.65 loaded
> > Jul 1 16:18:11 jrh6pc kernel: bttv: using 2 buffers with 2080k (4160k
> > total) for capture
> > Jul 1 16:18:11 jrh6pc kernel: bttv: Bt8xx card found (0).
> > Jul 1 16:18:11 jrh6pc kernel: bttv0: Bt848 (rev 17) at 00:0c.0, irq:
> > 10,
> > latency: 64, memory: 0xebbfe000
> > Jul 1 16:18:11 jrh6pc kernel: bttv0: model: BT848(Hauppauge old)
> > [insmod
> > option]
> > Jul 1 16:18:11 jrh6pc kernel: bttv0: IRQ 10 busy, change your PnP
> > config in
> > BIOS
> > Jul 1 16:18:16 jrh6pc kernel: i2c-core.o: driver i2c TV tuner driver
> > registered.
> > Jul 1 16:18:26 jrh6pc kernel: i2c-core.o: driver i2c msp3400 driver
> > registered.
> >
> >
> > --------------------------------------------------------------------
> > For info below: My card is a hauppauge 848 card with the phillips NTSC
> > tuner
> >
> > modules.conf contents
> > ---------------------------------------------------------------------
> > alias char-major-81 videodev
> > alias char-major-81-0 bttv
> > options bttv card=2 tuner=2
> > options tuner debug=1 type=2
> >
> >
> > v4l-info output
> > -----------------------------------------------------------------
> > When running v4l-conf, the following messages come through.
> >
> >
> > v4l-conf
> >
> > v4l-conf: using X11 display :0.0
> > dga: version 2.0
> > mode: 1280x1024, depth=16, bpp=16, bpl=2560, base=0xe0041000
> > can't open /dev/video: No such device
> >
> > ls -l /dev/video*
> > --------------------------------------------------------------------
> > ls -l /dev/video*
> > lrwxrwxrwx 1 root root 6 Apr 21 18:04 /dev/video ->
> > video0
> > crw-rw-rw- 1 jrh sys 81, 0 Apr 14 07:06 /dev/video0
> > crw------- 1 jrh sys 81, 1 Apr 14 07:06 /dev/video1
> > crw------- 1 jrh sys 81, 2 Apr 14 07:06 /dev/video2
> > crw------- 1 jrh sys 81, 3 Apr 14 07:06 /dev/video3
> > Help! All the modules appear to be installed yet.. the device is
> > not reacting..
> >
> >
> >
> >
> >
> >
> > _______________________________________________________
> > Send a cool gift with your E-Card
> > http://www.bluemountain.com/giftcenter/
> >
> >
> >
>
I am Popeye of BORG! You will be Askimiligrated!!
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
