|
This email was delivered to you by The Free Internet,
a Business Online Group company. http://www.thefreeinternet.net I wrote earlier about receiving a dial-out error
message "pppd daemon died unexpectedly" every time I dial out using either
KDE-kppp or Gnome using my Linux Mandrake 7.0 PC and 56k MRI external
modem.
My \etc\resolv.conf has my ISP's DNS
settings.
My \etc\ppp\options file previously was
just
noauth
lock
I have amended this file to now look like
lock
noauth defaultroute ipcp-accept-remote ipcp-accept-local idle 300 but still receive the "pppd daemon" died
error.
I have included my Modem's settings in this email
(please see below).
The only changes I have made are
in the Guard Time from 50 to 255
and
in the Initialization String by adding
&D2&C1&K0&M0 after ATZ.
This is what my Modem settings look
like
Device options Modem Device /dev/ttyS1 Flow Control None Line Termination CR/LF Connection Speed 57600 Use Lock file - disabled (I have tried with Lock File enabled) Modem timeout 600 seconds Modem options
Busy Wait set to 30 seconds Modem volume set to middle option
Modem Commands
Pre-Init Delay (sec/100) set to 300 Initialization String ATZ&D2&C1&K0&M0 Post-Init Delay (sec/100) set to 300 Init response set to OK Dial String ATDT Connect Response CONNECT Busy Response BUSY No Carrier Response NO CARRIER No Dialtone Response NO DIALTONE Hangup String +++ATH Hangup Response OK Answer String ATA Ring Response RING Answer Response CONNECT Escape String +++ Escape Response OK Guard Time (sec/50) set to 255 Volume off/low/high M0L0 M1L1 M1L4 PPP options
pppd Timeout set to 200 seconds (I have tried using lower values) options enabled are Show Clock, Disconnect X-server, and Minimize Windows I would be grateful if anyone could point out any
errors in these Modem settings or anything else that may help me.
Minhaz |
