RE: [expert] kernel panic after/while mounting with enterpriseke rnel

[chris . haidinyak]

Kursad,   We have almost identical units and I remember that I had to disconnect the IDE in order to boot from the SCSI but that may be because of my lack of experience with Mandrake.  Otherwise, the system would boot from IDE and then use the SCSI as other partitions. If other people found a way around this, please let me know; thanks.   --   Chris Haidinyak   -----Original Message----- From: Kursad Kayaturk [mailto:[EMAIL PROTECTED]] Sent: Friday, February 01, 2002 12:10 PM To: [EMAIL PROTECTED] Subject: [expert] kernel panic after/while mounting with enterprise kernel Hi guys,             I have setup two thunder k7 before with mandrake 8.1 but now I have great problems. The problem is this time I have used a scsi drive Fujitsu MAN3367MP but the problem is I have parity errors and linux can not read/write with installation cdrom. When I disconnect the harddisk everthing is fine. The installation process has no errors.  I select to install smp, enterprise and the standard 2.4 kernels. Then the problem starts the system boots with enterprise kernel I have a kernel panic right after/while /dev mount the error is something like cannot reach end of device. Filesystem used is XFS. I don’t know the problem if you can help me I will be pleased. The system can boot up with standard kernel and work flawless. But I can use only about 8xx memory. Also do anyone know that if enterprise kernel supports smp system or not.   Regards, Kursad Kayaturk   This system is Dual XP1900+                         Tyan thunder k7 (onboard scsi adaptec 7889 UW160, 2 onboard 3COM NICS)                         2GB memory                         36 GB Fujitsu MAN3367MP                         60 GB IBM IDE                         64 MB Geforce Ti