On Thursday 28 March 2002 13:50, you wrote: > On Monday 25 March 2002 10:38 pm, you wrote: > > Hi listmembers, > > i was hoping someone out there might be able to help me with this > > I have installed MDK8.0 on a compaq armada 7400 ,everything wors fine > > ,except for the nic a pcmcia D-Link-660+ , > > when I try to configure the network I get > > "insmod'ing module tlan failed at /usr/lib/libDrakX/modules.pm line510 > > below is the output from a modprobe tlan > > #modprobe tlan > > /lib/modules/2.4.3-20mdk/kernel/drivers/net/tlan.o.gz: init_module: No > > such device > > Hint: insmod errors can be caused by incorrect module parameters, > > including invalid IO or IRQ parameters > > /lib/modules/2.4.3-20mdk/kernel/drivers/net/tlan.o.gz: insmod > > /lib/modules/2.4.3-20mdk/kernel/drivers/net/tlan.o.gz failed > > /lib/modules/2.4.3-20mdk/kernel/drivers/net/tlan.o.gz: insmod tlan failed > > > > I think I must be pretty close ,sounds to me like a conflict ,but i have > > no idea how to goabout fixing it . > > thanks in advance > > Jason > > Try: > > modprobe tulip > > > Kevin
---------------------------------------- Content-Type: text/plain; charset="iso-8859-1"; name="message.footer" Content-Transfer-Encoding: 8bit Content-Description: ---------------------------------------- Hi Kevin , thanks for the responce here is the out put from modprobe tulip [root@localhost jason]# modprobe tulip /lib/modules/2.4.3-20mdk/kernel/drivers/net/tulip/tulip.o.gz: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.3-20mdk/kernel/drivers/net/tulip/tulip.o.gz: insmod /lib/modules/2.4.3-20mdk/kernel/drivers/net/tulip/tulip.o.gz failed /lib/modules/2.4.3-20mdk/kernel/drivers/net/tulip/tulip.o.gz: insmod tulip failed [root@localhost jason]# same deal as the tlan error ,this has me stumped I installed the system with the lan card in the machine and it said that it had detected the card and that it had been configured , maybe this has stuffed everything up . Do you think that reinstall with out the card ,then try and configure it on a clean system? Or does anyone know of a pcmcia network card that auto configs under MDK 8.0 ,I have only just bought this card and would be able to swap it if there was an easier way ?????? thanks again jason
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
