|
Hi .
I have a problem with a IDE Tape Backup . I think
is detected ok but when trying to work with it it gives me error when testing or
trying to extract (testing tar -tvf /dev/ht0 , extracting tar -xvf /dev/ht0 ) I
back up with tar -cvf /dev/ht0 /home with no errors.
This is what dmesg return after an error of tar
.
ide-tape: hdd <-> ht0: Seagate STT20000A rev
8A51
ide-tape: hdd <-> ht0: 1000KBps, 6*54kB
buffer, 9720kB pipeline, 110ms tDSC, DMA
ide-tape: Reached idetape_chrdev_open
ide-tape: ht0: DSC timeout
ide-tape: ht0: I/O error, pc = 8, key =
2, asc = 4, ascq = 1
ide-tape: ht0: I/O error, pc = 8, key =
2, asc = 4, ascq = 1
ide-tape: ht0: I/O error, pc = 8, key =
2, asc = 4, ascq = 1
ide-tape: ht0: I/O error, pc = 8, key =
2, asc = 4, ascq = 1
ide-tape: ht0: I/O error, pc = 8, key =
2, asc = 4, ascq = 1
ide-tape: ht0: I/O error, pc = 10, key = 2,
asc = 4, ascq = 1
ide-tape: ht0: I/O error, pc = 34, key = 2,
asc = 4, ascq = 1
ide-tape: Reached idetape_chrdev_open
ide-tape: ht0: DSC timeout
ide-tape: ht0: I/O error, pc = 8, key = 2, asc = 4, ascq = 1 ide-tape: ht0: I/O error, pc = 8, key =
2, asc = 4, ascq = 1
ide-tape: ht0: I/O error, pc = 8, key =
2, asc = 4, ascq = 1
ide-tape: ht0: I/O error, pc = 10, key = 2,
asc = 4, ascq = 1
ide-tape: ht0: I/O error, pc = 34, key = 2,
asc = 4, ascq = 1
ide-tape: Reached idetape_chrdev_open
ide-tape: Reached idetape_chrdev_open
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: Reached idetape_chrdev_open
ide-tape: Reached idetape_chrdev_open
ide-tape: Reached idetape_chrdev_open
ide-tape: Reached idetape_chrdev_open
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: Reached idetape_chrdev_open
ide-tape: Reached idetape_chrdev_open
ide-tape: Reached idetape_chrdev_open
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: Reached idetape_chrdev_open
ide-tape: Reached idetape_chrdev_open
ide-tape: Reached idetape_chrdev_open
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: bh == NULL in
idetape_copy_stage_to_user
ide-tape: bh == NULL in
idetape_copy_stage_to_user
Any ideas ?
Thanks,
Jorge Gim�nez
|
