All,
I get the following output from sensors.
as99127f-i2c-0-2d
Adapter: SMBus I801 adapter at e800
Algorithm: Non-I2C SMBus adapter
VCore 1: +1.79 V (min = +1.66 V, max = +1.82 V)
VCore 2: +1.79 V (min = +1.66 V, max = +1.82 V)
+3.3V: +3.45 V (min = +3.13 V, max = +3.45 V)
+5V: +5.02 V (min = +4.72 V, max = +5.24 V)
+12V: +11.55 V (min = +10.79 V, max = +13.19 V)
-12V: -11.56 V (min = -10.73 V, max = -13.19 V)
-5V: -4.98 V (min = -4.74 V, max = -5.24 V)
fan1: 0 RPM (min = 3000 RPM, div = 2) ALARM
fan2: 3970 RPM (min = 3000 RPM, div = 2)
fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM
temp1: +44�C (limit = +60�C, hysteresis = +50�C)
temp2: +37.3�C (limit = +67�C, hysteresis = +60�C)
temp3: +112.2�C (limit = +60�C, hysteresis = +50�C)
vid: +1.75 V
alarms: Chassis intrusion detection
beep_enable:
Sound alarm enabled
CPU running about 6 degrees hotter than normal but thats because the
ambient air temp is at about 100 (work a little shut down let cool work
a little more) What my question is .... How do I get sensors to ignore
fan 1 fan3 and temp3.... they aren't connected to anything with my
hardware and the instructions on the man page (setting fan1 to ignore
for example) don't seem to work.
My chipset is set at
# I2C module options
alias char-major-89 i2c-dev
per instructions from sensors-detect and all works well except I can't
get it to ignore those 3 sensors... Tips?
James
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
