Jason,
I had the same problem and the answer for me was to put the
following in /etc/init.d/dhcpd
change
daemon /usr/sbin/dhcpd
to
daemon /usr/sbin/dhcpd -q eth1
the -q eth1 tells it to only pay attention to eth1 and ignore
eth0. In may case I get my IP via dhcp and also deliver dhcp IP's
internally. The error message you mentioned then went away.
James
On Sun, 21 Jul 2002 14:42:49 -0700 (MST)
"Jason Guidry" <[EMAIL PROTECTED]> wrote:
>
> I'm now living among civilization (San Antonio, close enough)
> and I'm trying to set up a router to share our cable connection.
> this is a minimal system(no X or extra garbage) with two NICs,
> one plugged into the cable modem and the other into an 8 port
> switch.
>
> dhcpd keeps complaing that I have not made a subnet declaration
> for my the NIC connected to the modem (eth1). I'm obviously not
> serving connections from this interface, and it isn't listed in
> dhcpd.interfaces. how do I make a declaration for this
> interface? is DHCP _really_ the easiest way to go about sharing
> my connection?
>
> --------------------------<my
> dhcpd.conf>-----------------------------------------
>
> default-lease-time 600;
> max-lease-time 7200;
> option domain-name "home.net";
> option domain-name-servers 192.168.1.3, 192.168.1.5;
>
> subnet 192.168.0.0 netmask 255.255.255.0 {
> option routers 192.168.0.1;
> option broadcast-address 192.168.0.255;
> range 192.168.0.2 192.168.0.127;
> }
>
>
> #wireless net
>
> subnet 10.0.0.0 netmask 255.255.255.0 {
> option routers 10.0.0.1;
> option broadcast-address 10.0.0.255;
> range 10.0.0.2 10.0.0.127;
> }
>
> ---------------------------------</etc/dhcpd.conf>-------------
> ---------------------------
>
> --
> Jason Guidry
> gmaestro.org
>
>
>
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
