I have conected a Nikon 755 under 9.0 and has work like a charm. After be sure usb, usb-core, usb-storage and ide-scsi modules are loaded I created a directory to be mounted (mkdir -m 777 /mnt/camera).
Then, after have usb-pluged the camera, I did: mount -t vfat /dev/sda1 /mnt/camera And it worked fine, using konqueror or nautilus to move the files from the camera to my harddrive. I tested this in a Toshiba laptop (SAtellite 4090) and a Pentium 4. El Dom 01 Dic 2002 20:48, Munagala Ramanath escribió: > Hi, > > I'm trying to use my Fuji FinePix 2600Z camera. It works fine with 8.2: > When i plug it into the USB port, I get /dev/sda1 created and I can > mount it. > > But on ML 9.0 no /dev/sd* devices get created; this is what I see in > the > logfile: > ----------------------------------------------------------------- > Nov 29 14:33:05 abc kernel: hub.c: USB new device connect on bus1/2, > assigned device number 2 > Nov 29 14:33:05 abc kernel: usb.c: USB device 2 (vend/prod 0x4cb/0x100) > is not > claimed by any active driver. > Nov 29 14:33:08 abc /etc/hotplug/usb.agent: Setup usb-storage > usb-storage for USB product 4cb/100/100 > Nov 29 14:33:09 abc kernel: Initializing USB Mass Storage driver... > Nov 29 14:33:09 abc kernel: usb.c: registered new driver usb-storage > Nov 29 14:33:09 abc kernel: scsi1 : SCSI emulation for USB Mass Storage > devicesNov 29 14:33:09 abc kernel: Vendor: Fujifilm Model: FinePix > 1400Zoom Rev: 0100 > Nov 29 14:33:09 abc kernel: Type: Direct-Access > ANSI SCSI revision: 02 > Nov 29 14:33:09 abc kernel: USB Mass Storage support registered. > Nov 29 14:52:37 abc kernel: usb-uhci.c: interrupt, status 3, frame# > 1024 > ----------------------------------------------------------------- > > The same sort of thing happens when I plug in a USB card reader that > has > a SmartMedia card in it: > > ----------------------------------------------------------------- > Nov 29 22:00:05 abc kernel: hub.c: USB new device connect on bus1/2, > assigned device number 4 > Nov 29 22:00:05 abc kernel: scsi2 : SCSI emulation for USB Mass Storage > devicesNov 29 22:00:05 abc kernel: usb-uhci.c: interrupt, status 4, > frame# 28 > Nov 29 22:00:05 abc kernel: Vendor: General Model: Flash Disk Drive > Rev: 2.05 > Nov 29 22:00:05 abc kernel: Type: Direct-Access > ANSI SCSI revision: 02 > Nov 29 22:00:09 abc /etc/hotplug/usb.agent: Setup usb-storage for USB > product 3538/1/205 > ----------------------------------------------------------------- > > Again, no /dev/sd* devices created, so I'm not sure what to mount. > > Any help is appreciated. Thanks. > > Ram > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > http://mailplus.yahoo.com -- Francisco Alcaraz Ariza Departamento de Biología Vegetal Universidad de Murcia E-30100 Murcia España (Spain)
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
