As a long time Mandrake user, I am continually pleased with the contributions to Expert, and have had numerous questions answered by the talent and resource of everyone's contributions.
I am experiencing a minor challenge with an 8.2 production workstation. I am running a stock 2.4.19-16mdksmp on a Dell Precision 410, loaded with multiple SCSI drives, video capture, and a single IDE interface. When I added a SCSI CDRW drive to the system, the IDE CDROM was no longer recognized on boot, and I haven't been able to figure out how to configure it. Ripping and Burning is so much faster with two separate drives, and the fact that one is sitting idle, is quite frustrating. Before the addition of the SCSI CDRW, /dev/cdrom pointed to the IDE connected CDROM. Character devices: 1 mem 2 pty/m%d 3 pty/s%d 4 tts/%d 5 cua/%d 6 lp 7 vcs 10 misc 14 sound 21 sg 29 fb 81 video_capture 128 ptm 136 pts/%d 162 raw Block devices: 1 ramdisk 2 fd 8 sd 9 md 11 sr 65 sd 66 sd And under /dev, cdrom is setup as follows: cdrom -> cdroms/cdrom0 where cdrom0 -> ../scsi/host1/bus0/target0/lun0/cd. So, how do I make use of the IDE CDROM? There are no entries in the /dev directory pointing to any /dev/h*, as the entire system is SCSI, sans the IDE based CDROM. Thanks in advance for the help! Joseph ===== Joseph Feigon __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
