Hi all,
I need to setup a videoconference server, and I would like to use openmcu.
I have downloaded the software from http://www.openh323.org, and I tried to
run it in the server (linux mandrake 8.1)
But when I connect to server using gnomemeeting, in the server I can read
these messages:
=================
[EMAIL PROTECTED] obj_linux_x86_r]$ ./openmcu -v -n
OpenMCU Version 1.1.7 by OpenH323 Project on Unix Linux (2.4.8-34.1mdk-i686)
Listening on port 1720
Codecs (in preference order):
Table:
SpeexNarrow-8k{sw} <1>
SpeexNarrow-15k{sw} <2>
GSM-06.10{sw} <3>
MS-GSM{sw} <4>
G.711-uLaw-64k{sw} <5>
G.711-ALaw-64k{sw} <6>
LPC-10{sw} <7>
H.261-QCIF <8>
Set:
0:
0:
SpeexNarrow-8k{sw} <1>
SpeexNarrow-15k{sw} <2>
GSM-06.10{sw} <3>
MS-GSM{sw} <4>
G.711-uLaw-64k{sw} <5>
G.711-ALaw-64k{sw} <6>
LPC-10{sw} <7>
1:
H.261-QCIF <8>
Waiting for incoming calls for "OpenH323 MCU v1.1.7"
Command ?
Opening connection
Incoming H.323 call from Oscar Santacreu [xxx.xxx.xxx.64] has not selected a
room.
Using room room101 as the default.
Accepting call from Oscar Santacreu [xxx.xxx.xxx.64] using gnomemeeting/0.96.1
(OpenH323 v1.11.2) with room id room101
Member ip$xxx.xxx.xxx.64:30008/15143 will not hear their own voice
Started logical channel: sending SpeexNarrow-8k{sw} <2>
Started logical channel: sending H.261-QCIF <9>
Started logical channel: receiving SpeexNarrow-8k{sw} <1>
Started logical channel: receiving H.261-QCIF <8>
=================
But I can't see the remote image with gnomemeeting (maybe the server is not
sending video signal?).
When I disconnect, the server shows these messages:
================
Room room101 is now empty
ROOM HAS BEEN REMOVED (ReadVideo)
Closing connection
================
When a friend connects to server with Ms Netmeeting the server shows these
messages:
================
Opening connection
Incoming H.323 call from antonio [xxx.xxx.xxx.63] has not selected a room.
Using room room101 as the default.
Accepting call from antonio [xxx.xxx.xxx.63] using Microsoft� NetMeeting�/3.0
with room id room101
Adding member ip$xxx.xxx.xxx.63:1138/11841 to list of
ip$xxx.xxx.xxx.64:30000/15144
Adding audio buffer for ip$xxx.xxx.xxx.63:1138/11841 to connection
ip$xxx.xxx.xxx.64:30000/15144
Adding audio buffer for ip$xxx.xxx.xxx.64:30000/15144 to connection
ip$xxx.xxx.xxx.63:1138/11841
Member ip$xxx.xxx.xxx.63:1138/11841 will not hear their own voice
===========================
But netmeeting is always waiting for a response, and never starts
videoconferencing. Then, the server shows:
==========================
Removing audio buffer for ip$xxx.xxx.xxx.63:1138/11841 from connection
ip$xxx.xxx.xxx.64:30000/15144
Removing audio buffer for ip$xxx.xxx.xxx.64:30000/15144 from connection
ip$xxx.xxx.xxx.63:1138/11841
Closing connection
=========================
While neetmeeting still waits for a response. In my computer, with
gnomemeeting, I still can't see anything!
I can't find anything in google about configuring openmcu under linux and
clients under linux and windows. I really need to setup the videoconference
server as soon as possible.
Anybody can help me? Where can I find the documentation about openmcu?
Thank you!
Best regards!
--
�scar Santacreu
Usuario de Linux Registrado #227443
http://counter.li.org/
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
