On Saturday 22 Mar 2003 7:05 pm, you wrote:
> On Saturday 22 March 2003 11:46 am, you wrote:
> > On Saturday 22 Mar 2003 3:49 pm, Preston-Campbell wrote:
> > > I have the Finepix A303, also an xD camera and it does appear
> > > that Linux is recognizing the device appropriately.  I have had
> > > no trouble mounting the drive as a USB mass storage device in the
> > > following manner.  It shows up in KDiskFree whenever I plug it
> > > in,  I then click on 'mount' and then it is available in
> > > /mnt/removable.  This has worked on a desktop running Mdk 9.0 and
> > > a laptop also with 9.0.
> >
> > Hi, Brian.
> >
> > Do you have an fstab line for it?  I have an entry in KDiskFree for
> > /dev/sdb as /mnt/camera, but when I try to mount it I get 'No
> > medium found'.  This is the same message as I have got when trying
> > to mount in from command line.
> >
> > Are you reading xD cards with yours?
> >
> > Anne
>
> I don't have anything for /dev/sda1 in fstab.  Attempting to mount the
> camera in the mount points section of the Mandrake Control Center and
> adding the camera to fstab did not work for me when I tried to access
> the card that way.
>
> I have attached a screenshot of my KDiskFree with the camera mounted
> on /dev/sba1.  I do not mount it as root, just as a user.  And yes,
> it is an xD card that I am using if that helps.
>
I removed the fstab line and tried it your way, but the camera did  not show 
up in KDiskFree.  /proc/scsi/scsi gives me

Attached devices:
Host: scsi0 Channel: 00 Id: 05 Lun: 00
  Vendor: CANON    Model: IX-27025E        Rev: 1.13
  Type:   Scanner                          ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: MATSHITA Model: LS-120 VER5   00 Rev: F523
  Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 02 Lun: 00
  Vendor: MITSUMI  Model: CR-48X9TE        Rev: 1.0C
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 00
  Vendor:          Model:                  Rev:
  Type:   <NULL>                ANSI SCSI revision: ffffffff

Does knowing the scsi bus address help me at all?  How can I use this  info?

Anne
-- 
Registered Linux User No.293302


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to