On Sun, 2003-03-23 at 11:02, Gonzalo Avaria wrote:
> Hi Rob, sorry that i could not answer your question, but i would like
> to know for what are the lm_sensors, because i know that on the IBM
> TP600X you cannot use them because it could conflict with the
> motherboard and you will have to replace it.
> Sorry again that i couldn't answer your question.
> 

lm_sensors detects hardware status and reports on it. For instance:

Mar 23 11:01:19 felix sensord: Chip: ddcmon-i2c-2-50
Mar 23 11:01:19 felix sensord: Adapter: DDC Voodoo3/Banshee adapter
Mar 23 11:01:19 felix sensord: Algorithm: Bit-shift algorithm
Mar 23 11:01:19 felix sensord:   Monitor ID: IXA181=
Mar 23 11:01:19 felix sensord:   Serial number: -1655559957
Mar 23 11:01:19 felix sensord:   Monitor Size (cm): 49x69
Mar 23 11:01:19 felix sensord:   Vertical Sync (Hz): 10-32
Mar 23 11:01:19 felix sensord:   Horizontal Sync (KHz): 32-32

man, sure is reassuring to know that no one has replaced my CRT :-)

Mar 23 11:01:19 felix sensord: Chip: via686a-isa-6000
Mar 23 11:01:19 felix sensord: Adapter: ISA adapter
Mar 23 11:01:19 felix sensord: Algorithm: ISA algorithm
Mar 23 11:01:19 felix sensord:   CPU core: +1.71 V (min = +1.46 V, max =
+1.78 V
)
Mar 23 11:01:19 felix sensord:   3.3V: +3.25 V (min = +2.95 V, max =
+3.62 V)
Mar 23 11:01:19 felix sensord:   +5V: +5.02 V (min = +4.47 V, max =
+5.49 V)
Mar 23 11:01:19 felix sensord:   +12V: +11.80 V (min = +10.79 V, max =
+13.18 V)

Power supply is giving clean juice, 

Mar 23 11:01:19 felix sensord:   CPU Fan: 3879 RPM (min = 3497 RPM, div
= 2)
Mar 23 11:01:19 felix sensord:   P/S Fan: 4245 RPM (min = 3497 RPM, div
= 2)

Low-speed quiet fans are working normally...

Mar 23 11:01:19 felix sensord:   SYS Temp: 37.1 C (limit = 80.5 C,
hysteresis = 
69.8 C)
Mar 23 11:01:19 felix sensord:   CPU Temp: 34.9 C (limit = 59.9 C,
hysteresis = 
55.1 C)

System temperature is nice and cool, relatively -- I ain't in a big
hurry to stick my hand in there :-).

-- 
Jack Coates
Monkeynoodle: A Scientific Venture...


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to