Hello all!Just a guess....
Six month ago, I bought a new mobo ... onboard, my new mobo have
the "Promise chip PDC20276" That offers the possibility to add 4 hard disk more
and set them like Raid 0 or Raid 1 (MotherBoard : Asus P4T533 ) ...
I was running MDK 9.0 ... and all my five hard disk was working ok !! .... but, last
monday, I installed MDK9.1 ... and my disk on RAID dissapear ..
----
Harddrake, shows only disks on primary or secondary ide... and show an unknown
device :
Vendor: ?Promise Technology, Inc.
Bus: ?PCI
Bus identification: ?105a:5275:1043:807e
Location on the bus: ?2:2:0
Description: ?20276
Module: ?unknown
Media class: ?STORAGE_RAID
PCI-KDE control module shows a little more information ... :
Raid bus controller: Promise Technology, Inc. PDC20276 IDE (rev 01)(prog-if 85)
Subsystem : Asustek Computer, Inc. Unknown Device 807e
Flags : bus master 66mhz, slow devsel, latency 32, IRQ 9
I/O ports at d800 [size=8]
I/O ports at d400 [size=4]
I/O ports at d000 [size=8]
I/O ports at b800 [size=4]
I/O ports at b800 [size=16]
Memory at ed800000 (32-bit, non prefetchtable ) [size=16k]
Capabilities : < available only to root >
----
module problem ? .. kernel ? Any idea will be "super" welcome !!
Rodrigo Sanchez DGF, U. de Chile
Have one motherboard with raid controllers, Abit with HPT, but I don't use raid. However the following is in my modules.conf file:
# probeall scsi_hostadapter ide-scsi ataraid # So you might see if the module ataraid is being loaded.
Also when I loaded ML 9.1 my system would not boot without adding "acpi=off" which did not happen with ML 9.0. You might try booting with this stanza.
Larry
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
