On Monday 02 June 2003 12:24 pm, stanly klyuhin wrote: > В сообщении от Понедельник 02 Июнь 2003 21:23 Anne Wilson > написал: > > > > Right - when you get home, go through the mcc and explain exactly > > > > where and how you can see hdc. Then do the same for where it > > > > failed, being very specific about how you tried to use diskdrake > > > > and fdisk. I'm hunting for clues, but I'm sure we'll get there. > > > > > > have we already seen his `dmesg` output? > > > > I haven't. How many tail lines do you think he would need? > > exactly that part, > and also any errors/warnings. > > ide0: BM-DMA at 0xb060-0xb067, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xb068-0xb06f, BIOS settings: hdc:DMA, hdd:pio > hda: FUJITSU MHS2030AT, ATA DISK drive > blk: queue c02e88a0, I/O limit 4095Mb (mask 0xffffffff) > hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: attached ide-disk driver. > hda: host protected area => 1 > hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, > UDMA(100) Partition check: > /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
Say... this brings up a question I have. I was attempting to install 9.1 on a workstation at work and for the first time I found I couldn't select expert install. It just wasnt there. I don't ever recall seeing that. After about the 4th attempt I allso noticed that right about the point above I saw something about DMA not enabled. ?? I also noticed that this box I'm typing from was very slow until I used the HD tune program to turn some things on. Is Mandrake by default leaving all that stuff off for less install issues?
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
