-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Monday 09 June 2003 09:27 pm, Robert Crawford wrote:
> On Monday 09 June 2003 19:43, Larry Sword wrote:
> > Larry Sword wrote:
> > > Praedor Tempus wrote:
> > >> I recently picked up an Athlon XP2700+ to replace my
> > >> Duron 1100.  The switch went fine except my [EMAIL PROTECTED] mobo
> > >> apparently doesn't support anything greater than an
> > >> XP1500+.  It is an MSI KT333 ultra and the manual says
[...]
> > > After changing cpu from the Duron, FSB=100, you will need to change
> > > the FSB for the Athlon XP2700+ to FSB=133, this will set the correct
> > > speed for the processor.
[...]
> The via kt333 chipset is misleading- it's actually a kt266a that will run
> PC2700 ddr at 333Mhz, not that the FSB is 333Mhz. So setting the bios to
> 133 (266) is actually what it's rated at, and it's normal setting, except
> of course when using the Duron 200Mhz FSB cpu. However, you might be able
> to get a higher FSB with overclocking, and dropping the mulitplier a
[...]

Well, all is well with the system now but I will still need a new mobo to take 
advantage of the CPU.  I have finally figured out the trick to "overclocking" 
the system and have found that this board will simply not do an FSB of 133 
Mhz.  Setting the frequency to 133 prevents the computer from even attempting 
to post.  I cannot even get to bios to reset it.  I have to unplug the system 
and pull the bios battery to reset the bios to defaults so I can boot up 
again.  I have since successfully bumped the FSB up to a mere 110 Mhz.  I 
will try bumping it up again and again until it fails and just go below that.

This board wont even handle what the MSI sites say it will.  It is supposedly 
capable of using up to an XP 2600+ which requires an FSB higher than this 
thing can actually handle.  

praedor

- -- 
The First Amendment rests on the assumption that the widest possible
dissemination of information from diverse and antagonistic sources is 
essential to the welfare of the public.
- --Justice Hugo Black
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+5hLjaKr9sJYeTxgRAp+5AKCOcz0scMISP412FPNW+0ul2Uq4OQCaAtDL
xZxsN1BFhtpA2UrvkNev1a4=
=F+MZ
-----END PGP SIGNATURE-----

Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to