what's cli command to show the following ? many thanks
Ken > Destination Gateway Genmask Flags Metric > Ref Use Iface > 192.168.1.0 * 255.255.255.0 U 0 0 > 0 usb0 > 192.168.0.0 * 255.255.255.0 U 0 0 > 0 eth0 > 127.0.0.0 * 255.0.0.0 U 0 0 > 0 lo > default 192.168.0.1 0.0.0.0 UG 0 0 > 0 eth0 > > Then I changed usb0 to 192.168.0.10 and I had > Destination Gateway Genmask Flags Metric > Ref Use Iface > 192.168.0.10 * 255.255.255.0 U 0 0 > 0 usb0 > 192.168.0.0 * 255.255.255.0 U 0 0 > 0 eth0 > 127.0.0.0 * 255.0.0.0 U 0 0 > 0 lo > default 192.168.0.1 0.0.0.0 UG 0 0 > 0 eth0 > > I switched off the pda, later switched it on again and > -boom- my eth0 > was gone! I had > > Destination Gateway Genmask Flags Metric > Ref Use Iface > 192.168.0.10 * 255.255.255.0 U 0 0 > 0 usb0 > 192.168.0.0 * 255.255.255.0 U 0 0 > 0 usb0 > 127.0.0.0 * 255.0.0.0 U 0 0 > 0 lo > default 192.168.0.1 0.0.0.0 UG 0 0 > 0 usb0 > > WTF! Now I have switched off the pda, usb0 is gone and I > was left with > lo as single network device! I did a 'service network > status' and it > listed eth0 as active. I did a 'service network stop' and > then started > it again and there was eth0 again. > I switched on the pda and eth0 was gone and usb0 took it's place. > > wobo > -- > Public GnuPG key available at http://www.wolf-b.de/misc > > > >
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
