modprobe scanner exits with no outputs cat /proc/bus/usb/devices shows:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=ce81f000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=1904 Rev= 1.00 S: Manufacturer=Hewlett-Packard S: Product=DeskJet 3820 S: SerialNumber=CN2C41N1HK18 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=0a01 Rev= 1.01 S: Manufacturer=Hewlett-Packard S: Product=hp scanjet scanner S: SerialNumber=CN35DS11V8 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 48mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms sane-find-scanner shows: found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0a01 [hp scanjet scanner]) at libusb:001:003 # A USB device was detected. This program can't be sure if it's really # a scanner. If it is your scanner, it may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. scanimage -L shows: No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). I will appreciate if you can help me to use my scanner with Linux. Best regards and thanks you Luis Duran On Fri, 2003-09-05 at 20:37, HaywireMac wrote: > On 05 Sep 2003 18:22:48 -0400 > Luis Duran <[EMAIL PROTECTED]> uttered: > > > I have this HP scanjet 2400 an Linux Mabdrake 9. I use the Mandrake > > Control Center to recognize my scanner but SANE doesn't support it. > > What can i do to use my scanner on Linux. I will appreciate if you > > help me. > > You may have to update to the latest version of sane backend. > > what is the output of "modprobe scanner" (if any)? > > then "sane-find-scanner"? > > see "man sane" for even more tips and info.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
