Thanks for the reply. Yeh ... done that ...
It's going into a cisco catalyst 2900XL and I've tried a few patch cables which work straight away when plugged into another PC .. the machine that isn't working is lighting up on the switch. I have 3 LAN cards with the same chipset ... all do the same thing ... it's like some odd routing restriction is in place? .. no firewall is enabled or anything. Brett. ----- Original Message ----- From: "Kwan Lowe" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, October 17, 2003 11:06 AM Subject: Re: [expert] ip addressing on lan > > > When I apply this IP using the wizard on install it all takes and seems to > > be there .. If I try and ping anything on the LAN I get destination > > unreachable, and if I ping the unit from another machine on the LAN it > > times out. But from the 9.1 machine, I can ping 192.168.0.200 (it's NIC > > ip) .. the routing table sees the ip, but wont look at the gateway or LAN. > > . > > Sounds suspiciously like a bad cable/connection. Can you try switching the > cable to a known-good and plugging into a know-good port on the hub or > switch? > > -- > The Digital Hermit Unix and Linux Solutions > http://www.digitalhermit.com > [EMAIL PROTECTED] > > > ---------------------------------------------------------------------------- ---- > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com >
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
