Hi all
{ Sorry, my earlier message had a bad reply-to setting; won't happen
again }
On Tuesday, 28 October 2003 at 13:58 h, HaywireMac wrote about "Re: [expert] Fatal
server error strikes":
>On Tue, 28 Oct 2003 18:29:51 -0000
>"Dick Gevers" <[EMAIL PROTECTED]> uttered:
>
>>
>> I found an X error reading i.a.:
>> quote
>> Using vt 7. Could not init font path element unix/:-1, removing from
>> list.
>> Fatal server error: could not open default font 'fixed'.
>> unquote
>>
>> Restoring all fonts from tarballs I had put on cdrw in preparation
>> for upgrading to 9.2 didn't help anything.
>
>Could be the perms are wrong on the fonts that you "restored", font
>server cannot read them. Make sure dirs are searchable, ie. drx-rx-r (I
>think).
That seems out of the question, because I had tarred them to local
drive and then burnt them to cdrw, copied the tarballs back to HD and
extracted the fonts. Tar is notorious for keeping permissions okay.
>> I googled for the problem and found several answers, such as:
>> *directory / is full: not in my case (> 3 Gb spare);
>> *restart xfs server; I already tried that in runlevels 3 and 5; no
>> difference.
>> * reinstall all XF86 packages: did that; didn't help.
>> * I restored /etc/XF86Config from tarball on cd: didn't help.
>> * another answer said to delete reference to default font in
>> XF86Config, but there wasn't any, except for an "other" Mandrake font
>> server.
>
>Yeah, since it can't find the referenced path, it's automatically
>deleting it from your config file.
Sorry, what do you imply by that. What should (could) I do with this
information? I am using Linux only since February, so I am not sure
where this can help me.
>> In each case I restarted the xfs server and tried to start X, but it
>> failed. In the last case I waited 10 to 15 minutes and saw an
>> occasional attempt by X to start up (a few coloured lines showing or
>> very fast flashing by of my last terminal screen), but nothing
>> helped. In these cases no login prompt could be reached, nor the
>> kernel messages.
>
>Maybe post the contents of /var/log/XFree86.0.log and we can see if
>there are any further clues as to what is causing the error.
See below.
>> I should very much appreciate it if somebody can advise me how to get
>> back in my Mandrake with X.
>>
>> { This message was previously posted to the newbie list, but
>> apparently nobody knew how to help me }
>>
>> Personally I don't know any solution anymore, except reinstalling.
>> But I hope somebody has an easier solution.
>
>In XF86Config-4, try commenting out the line:
>
> Load "type1"
Yes, I did some more googling and found one other similar piece of
advice, so I commented out a line reading Load unix/:-1 and (as per
that advice) deleted all similar looking file from /tmp and
/home/dvg/tmp.
The result was the same as before, though.
>which is, IIRC, where X tries to load the default XFS fonts. AFAIK,
>XFS really isn't even necessary now with Freetype handling font
>rendering.
>
>These are wiiiiiiiild guesses, but hey, you never know. Best of luck.
Thanks a bunch, Haywire. I hope somebody knows a solution.
Regards,
=Dick Gevers=
--
Registered Linux user #309037
(using W2K as punishment for my own stupidity).
Below is /var/log/XFree86.0.log:
++++++++++++++++++++++++++
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.19-35mdkenterprise i686 [ELF]
Build Date: 05 September 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??)
unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Oct 28 19:11:04
2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(WW) Option "XkbCompat" requires an string value
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us_intl"
(**) XKB: layout: "us_intl"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "DontZap"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class
06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class
06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class
06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class
01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class
0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class
06,80,00 hdr 00
(II) PCI: 00:0f:0: chip 105a,4d30 card 105a,4d33 rev 02 class
01,80,00 hdr 00
(II) PCI: 00:10:0: chip 127a,1002 card 1092,0a00 rev 01 class
07,00,00 hdr 00
(II) PCI: 00:11:0: chip 5333,8811 card 0000,0000 rev 00 class
03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is
set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 (VGA_EN is
cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN
is set)
(--) PCI:*(0:17:0) S3 Inc. 86c764/765 [Trio32/64/64V+] rev 0, Mem @
0xe2000000/23, BIOS @ 0xe1000000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe2800000 from 0xe2bfffff
to 0xe27fffff
(II) Active PCI resource ranges:
[0] -1 0 0xe2c20000 - 0xe2c2ffff (0x10000) MX[B]
[1] -1 0 0xe0000000 - 0xe000ffff (0x10000) MX[B]
[2] -1 0 0xe2c00000 - 0xe2c1ffff (0x20000) MX[B]
[3] -1 0 0xe2800000 - 0xe27fffff (0x0) MX[B]O
[4] -1 0 0xe1000000 - 0xe100ffff (0x10000) MX[B](B)
[5] -1 0 0xe2000000 - 0xe27fffff (0x800000) MX[B](B)
[6] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[7] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[9] -1 0 0x0000d800 - 0x0000d803 (0x4) IX[B]
[10] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[11] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[12] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe2c20000 - 0xe2c2ffff (0x10000) MX[B]
[1] -1 0 0xe0000000 - 0xe000ffff (0x10000) MX[B]
[2] -1 0 0xe2c00000 - 0xe2c1ffff (0x20000) MX[B]
[3] -1 0 0xe2800000 - 0xe27fffff (0x0) MX[B]O
[4] -1 0 0xe1000000 - 0xe100ffff (0x10000) MX[B](B)
[5] -1 0 0xe2000000 - 0xe27fffff (0x800000) MX[B](B)
[6] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[7] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[9] -1 0 0x0000d800 - 0x0000d803 (0x4) IX[B]
[10] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[11] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[12] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe2c20000 - 0xe2c2ffff (0x10000) MX[B]
[6] -1 0 0xe0000000 - 0xe000ffff (0x10000) MX[B]
[7] -1 0 0xe2c00000 - 0xe2c1ffff (0x20000) MX[B]
[8] -1 0 0xe2800000 - 0xe27fffff (0x0) MX[B]O
[9] -1 0 0xe1000000 - 0xe100ffff (0x10000) MX[B](B)
[10] -1 0 0xe2000000 - 0xe27fffff (0x800000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[14] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[16] -1 0 0x0000d800 - 0x0000d803 (0x4) IX[B]
[17] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[19] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.3.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
Trio32/64, Aurora64V+
(II) Primary Device is: PCI 00:11:0
(--) Assigning device section with no busID to primary device
(--) Chipset Trio32/64 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe2c20000 - 0xe2c2ffff (0x10000) MX[B]
[6] -1 0 0xe0000000 - 0xe000ffff (0x10000) MX[B]
[7] -1 0 0xe2c00000 - 0xe2c1ffff (0x20000) MX[B]
[8] -1 0 0xe2800000 - 0xe27fffff (0x0) MX[B]O
[9] -1 0 0xe1000000 - 0xe100ffff (0x10000) MX[B](B)
[10] -1 0 0xe2000000 - 0xe27fffff (0x800000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[14] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[16] -1 0 0x0000d800 - 0x0000d803 (0x4) IX[B]
[17] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[19] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe2c20000 - 0xe2c2ffff (0x10000) MX[B]
[6] -1 0 0xe0000000 - 0xe000ffff (0x10000) MX[B]
[7] -1 0 0xe2c00000 - 0xe2c1ffff (0x20000) MX[B]
[8] -1 0 0xe2800000 - 0xe27fffff (0x0) MX[B]O
[9] -1 0 0xe1000000 - 0xe100ffff (0x10000) MX[B](B)
[10] -1 0 0xe2000000 - 0xe27fffff (0x800000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[17] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[19] -1 0 0x0000d800 - 0x0000d803 (0x4) IX[B]
[20] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(**) s3(0): Depth 16, (--) framebuffer bpp 16
(==) s3(0): RGB weight 565
(==) s3(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) s3(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) s3(0): VESA BIOS detected
(II) s3(0): VESA VBE Version 1.2
(II) s3(0): VESA VBE Total Mem: 1024 kB
(II) s3(0): VESA VBE OEM: S3 Incorporated. Trio64
(==) s3(0): Using gamma correction (1.0, 1.0, 1.0)
(**) s3(0): Chipset: "Trio32/64"
(--) s3(0): Framebuffer @ 0xe2000000
(--) s3(0): videoRam = 1024 Kb
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) s3(0): MCLK 55.036 Mhz
(--) s3(0): RefClock: 16000
(--) s3(0): Max pixel clock at this depth is 80 Mhz
(II) s3(0): monitor1: Using hsync value of 31.50 kHz
(II) s3(0): monitor1: Using vrefresh range of 50.00-61.00 Hz
(II) s3(0): Clock range: 16.00 to 80.00 MHz
(II) s3(0): Not using mode "1024x480" (hsync out of range)
(II) s3(0): Not using mode "768x576" (hsync out of range)
(II) s3(0): Not using mode "768x576" (hsync out of range)
(II) s3(0): Not using default mode "640x350" (hsync out of range)
(II) s3(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "640x400" (hsync out of range)
(II) s3(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "720x400" (hsync out of range)
(II) s3(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "640x480" (hsync out of range)
(II) s3(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "640x480" (hsync out of range)
(II) s3(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "640x480" (hsync out of range)
(II) s3(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "800x600" (hsync out of range)
(II) s3(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "800x600" (hsync out of range)
(II) s3(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "800x600" (hsync out of range)
(II) s3(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "800x600" (hsync out of range)
(II) s3(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "800x600" (hsync out of range)
(II) s3(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) s3(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) s3(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) s3(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) s3(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) s3(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1152x864" (insufficient memory
for mode)
(II) s3(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x960" (insufficient memory
for mode)
(II) s3(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x960" (insufficient memory
for mode)
(II) s3(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory
for mode)
(II) s3(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory
for mode)
(II) s3(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory
for mode)
(II) s3(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) s3(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) s3(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) s3(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) s3(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) s3(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory
for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for
mode)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory
for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for
mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory
for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for
mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory
for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for
mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) s3(0): Not using default mode "832x624" (hsync out of range)
(II) s3(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1152x768" (insufficient memory
for mode)
(II) s3(0): Not using default mode "576x384" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory
for mode)
(II) s3(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory
for mode)
(II) s3(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1024" (insufficient memory
for mode)
(II) s3(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for
mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory
for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory
for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory
for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory
for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory
for mode)
(--) s3(0): Virtual size is 640x480 (pitch 640)
(**) s3(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) s3(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492
525 -hsync -vsync
(==) s3(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe2000000 - 0xe27fffff (0x800000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xe2c20000 - 0xe2c2ffff (0x10000) MX[B]
[7] -1 0 0xe0000000 - 0xe000ffff (0x10000) MX[B]
[8] -1 0 0xe2c00000 - 0xe2c1ffff (0x20000) MX[B]
[9] -1 0 0xe2800000 - 0xe27fffff (0x0) MX[B]O
[10] -1 0 0xe1000000 - 0xe100ffff (0x10000) MX[B](B)
[11] -1 0 0xe2000000 - 0xe27fffff (0x800000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[18] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[20] -1 0 0x0000d800 - 0x0000d803 (0x4) IX[B]
[21] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
[22] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) s3(0): Write-combining range (0xe2000000,0x100000)
(==) s3(0): Backing store disabled
(II) s3(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 color pattern filled rectangles
Solid Lines
(II) s3(0): Acceleration enabled
(II) s3(0): Using PIO
(II) s3(0): Using SW cursor
(**) Option "dpms"
(**) s3(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "Microsoft"
(**) Mouse1: Protocol: "Microsoft"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/ttyS1"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "1"
(**) Option "DataBits" "7"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(**) Mouse1: BaudRate: 1200
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
