Tony, a wiring diagram would be great! Thanks in advance.
Subject:
Re: [F500] Tach Hookup?
From:
Anthony Jagodnik <[EMAIL PROTECTED]>
Date:
Thu, 23 Nov 2006 10:44:03 -0500
To:
[email protected]
To:
[email protected]
With a conventional tach like the kroeber, it connects to the
lighting coil in parallel with the voltage regulator. When I
installed a Digatron a few years ago, I couldn't get the tach to work
reliably because the regulator created transients. Digatron
recommended a series resistor in place of the regulator and I added a
simple low pass filter on the tach input. Both tach operation and
charging of the battery have been very reliable in autocross. We are
in Ohio for thanksgiving; when we get back to Massacusetts in a few
days, I can probably dig up a wiring diagram if you are interested.
Regards,
Tony Jagodnik
NER SoloII FM 6 '87 KBS Mk3 F440
[EMAIL PROTECTED]
On Nov 22, 2006, at 8:04 PM, Lee Tilton wrote:
How do I hook up a tach to a Kaw 440? I read somewhere about using
a volt reg in line with the coil wire? Is the hookup the same for
an analog gauge vs. something like a Digatron?
------------------------------------------------------------------------
________________________________
FormulaCar Magazine - A Proud Supporter of Formula 500
The Official Publication of Junior Formula Car Racing
Subscribe Today! www.formulacarmag.com or 519-624-2003
_________________________________
_______________________________________________
F500 mailing list - [email protected]
To unsubscribe or change options please visit:
http://f500.org/mailman/listinfo/f500
*** Please, DO NOT send unsubscribe requests to the mailing list! ***
