Chuck, it helps to tie the injector pump arm full open to more quickly push
the air out of the tubes to the injector nozzles.
Open the bleed screw on the top of the pump until oil comes out of it to
prime the pump before even starting the motor.
These 2 things will reduce the amount of time you will have to run a smokey
premix.
Chuck Voboril
From: "jd" <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: <[email protected]>
Subject: Re: [F500] Pre-Mix
Date: Thu, 28 Dec 2006 21:14:00 -0500
I've always used Maxima oils, they recommend a mixture of Recommended
Premix Ratios
50-80cc (24-32:1) 125cc (24-40:1) 250cc (24-40:1)
500cc and up (32-60:1) I have almost always used the 32:1 mixture. I think
you will find many different ideas on ratios though.
JD
----- Original Message ----- From: "Chuck McAbee" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, December 28, 2006 7:11 PM
Subject: [F500] Pre-Mix
Installing a new engine and need to run it on pre-mix until the oil pump
gets working properly....it has been so long since I have done this I have
forgotten the proper mix of oil to gas....HELP!
Chuck McAbee
SEDIV #16
________________________________
FormulaCar Magazine - A Proud Supporter of Formula 500
The Official Publication of Junior Formula Car Racing
Subscribe Today! www.formulacarmag.com or 519-624-2003
_________________________________
_______________________________________________
F500 mailing list - [email protected]
To unsubscribe or change options please visit:
http://f500.org/mailman/listinfo/f500
*** Please, DO NOT send unsubscribe requests to the mailing list! ***
