Good to know! Based on the fact you gave the example of using
lSavedObjectIDs as response to the code i showed, you advice me to
adjust my code to a usage with lSavedObjectIDs?
As my mind runs over it i get stuck at the point i submit the both
objects at the same time , so therefore the 'after save'
lSavedObjectIDs can't be used, would you advice me to change the code
so that it can use this method?
On Dec 1, 1:57 am, "Blair McKenzie" <[EMAIL PROTECTED]> wrote:
> I would usually put basic save actions in one of the save functions -
> beforeSave, setData, or afterSave, depending on what I want to do.
>
> I use lSavedObjectIDs mainly for when I need to create secondary objects
> that are dependant on another.
>
> Another situation that can come up is when you are creating two that are
> co-dependant - for example if both objects should fail if either one has an
> error, or if they both have references to each other. In that case I put
> bSessionOnly="true" (saves the object just for the session) on
> ft:processformobjects and retrieve the new object with lSavedObjectIDs. Then
> at the end of the ft:processformobjects if there are no problems, use
> setData to resave the objects to the database.
>
> On Mon, Dec 1, 2008 at 11:47 AM, Marco van den Oever <
>
> [EMAIL PROTECTED]> wrote:
>
> > That is interesting, so you could use that for after save actions
> > mostly?
>
> > On Dec 1, 1:31 am, "Blair McKenzie" <[EMAIL PROTECTED]> wrote:
> > > When ft:processformobjects finishes saving an object it adds the saved
> > > object's objectid to lsavedobjectids. That is also a good way to tell if
> > > there were validation issues with the object - if there were the object
> > > won't be saved and no objectid will be added to the list.
>
> > > Blair
>
> > > On Mon, Dec 1, 2008 at 11:18 AM, Marco van den Oever <
>
> > > [EMAIL PROTECTED]> wrote:
>
> > > > Ok for the ones interested, as in this case every answer is a new
> > > > answer you just have to generate a new uuid value to set the objectid
> > > > of the object:
>
> > > > <!--- if data exists show answer field --->
>
> > > > <cfif len(stobj.department)>
>
> > > > <cfset application.tai = CreateUUID()>
>
> > > > <ft:object typename="ticketanswers" objectid="#application.tai#"
> > > > lFields="answer" r_stPrefix="prefix" legend="Answer" />
>
> > > > </cfif>
>
> > > > Then in the processform reformat the uuid so it matches the format
> > > > used in the form names:
>
> > > > <!--- if a answer was entered set to db --->
>
> > > > <cfif isdefined('application.tai')>
>
> > > > <cfset application.tai = replace(application.tai,'-','','ALL') />
>
> > > > </cfif>
>
> > > > Then if the answer field was filled in, process the value in the db:
>
> > > > <cfif form[application.tai & 'answer'] gt 0>
>
> > > > <ft:processformobjects typename="ticketanswers">
>
> > > > <cfset stProperties.answer = form[application.tai & 'answer'] />
> > > > <cfset stProperties.ticketobjectid = stobj.objectid />
>
> > > > </ft:processformobjects>
>
> > > > </cfif>
>
> > > > Cheers
>
> > > > On Nov 30, 11:20 pm, Marco van den Oever <[EMAIL PROTECTED]>
> > > > wrote:
> > > > > I want to check if the answer form field "answer" was filled in,
> > > > > therefore i have to check on the form field name.
>
> > > > > The form field names have a uuid assigned to their name which is
> > > > > simply the objectid, but when you add a additional object then the
> > > > > form fields of that object all get a new uuid value assigned to them.
>
> > > > > How can i grab that new uuid value so i also can use it in a cfif
> > > > > statement i use?
>
> > > > > Below you see a form dump, the fieldnames of the object tickets have
> > > > > all :EE93D033FB0828DD12E6AB8742653DDF
> > > > > The fieldnames of the object ticketanswers have all:
> > > > > EF696EF7B53EF4D0EA063AC9479E2A75
>
> > > > > EE93D033FB0828DD12E6AB8742653DDFDEPARTMENT EE7B4D0D-041E-80D9-
> > > > > CE7F039BB168EBD0
> > > > > EE93D033FB0828DD12E6AB8742653DDFDESCRIPTION This happens when:
> > > > > EE93D033FB0828DD12E6AB8742653DDFDESCRIPTIONINCLUDE 1
> > > > > EE93D033FB0828DD12E6AB8742653DDFERRORURL [empty string]
> > > > > EE93D033FB0828DD12E6AB8742653DDFNOTIFICATION online
> > > > > EE93D033FB0828DD12E6AB8742653DDFOBJECTID EE93D033-
> > > > > FB08-28DD-12E6AB8742653DDF
> > > > > EE93D033FB0828DD12E6AB8742653DDFPRIORITY medium
> > > > > EE93D033FB0828DD12E6AB8742653DDFSUBJECT Problem with:
> > > > > EE93D033FB0828DD12E6AB8742653DDFTYPENAME tickets
> > > > > EF696EF7B53EF4D0EA063AC9479E2A75ANSWER [empty string]
> > > > > EF696EF7B53EF4D0EA063AC9479E2A75ANSWERINCLUDE 1
> > > > > EF696EF7B53EF4D0EA063AC9479E2A75OBJECTID EF696EF7-B53E-F4D0-
> > > > > EA063AC9479E2A75
> > > > > EF696EF7B53EF4D0EA063AC9479E2A75TYPENAME ticketanswers
>
> > > > > On Nov 30, 9:25 pm, Marco van den Oever <[EMAIL PROTECTED]>
> > > > > wrote:
>
> > > > > > Awesome :) If anyone needs this also, check for a code example at:
>
> > > > > > farcry\core\webskin\dmProfile\edit.cfm
>
> > > > > > Cheers
>
> > > > > > On Nov 30, 8:22 pm, Matthew Williams <[EMAIL PROTECTED]>
> > > > > > wrote:
>
> > > > > > > There is something similar being done when you edit a profile
> > (which
> > > > > > > I've been waiting a long time for ;)). It sets and creates both
> > a
> > > > > > > profile and a user object within the same screen. Basically, in
> > the
> > > > > > > submit section, you create both types of objects and insert the
> > data
> > > > via
> > > > > > > their stproperties.
>
> > > > > > > Matthew Williams
> > > > > > > Geodesic GraFX
>
> > > > > > > Marco van den Oever wrote:
>
> > > > > > > > I have a tickets type, and i have a ticketanswers type.
>
> > > > > > > > For the tickets type i have a custom edit so i am able to
> > integrate
> > > > > > > > code for updating the ticketanswers type.
>
> > > > > > > > Ideal would be to edit a ticket and be able to also set the
> > > > > > > > ticketanswers type with the same "save" button. Then display
> > all
> > > > the
> > > > > > > > answers beneath.
>
> > > > > > > > I can make this a long story about how i already tried
> > different
> > > > > > > > things as a redirect on button click or a additional
> > > > > > > > ft:processFormObjects typename="ticketanswers", but let me just
> > > > ask:
>
> > > > > > > > How would you do this?
>
> > > > > > > > Thanks
>
> > ------------------------------------------------------------------------
>
> > > > > > > > No virus found in this incoming message.
> > > > > > > > Checked by AVG -http://www.avg.com
> > > > > > > > Version: 8.0.176 / Virus Database: 270.9.11/1820 - Release
> > Date:
> > > > 11/29/2008 6:52 PM
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"farcry-dev" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/farcry-dev?hl=en
-~----------~----~----~----~------~----~------~--~---
