Hi all,

A quick follow-up on my previous message: JackMoebius 1.1.0 and JackMate 2.1.0 
are out. It’s the first update since launch, and a free one for everyone who 
already has a license (JackMate is still free and open source, MIT).

Two things changed, and I think they matter most for people doing multichannel 
work with Jack:

1. A sound card of its own for each app. In 1.0, each app’s output was limited 
to a stereo pair. Now every CoreAudio app can have its own virtual device, 
“JackMoebius for <App>“, with up to 64 channels in each direction. It shows up 
in the app’s device menu like a real audio interface, and its channels appear 
in Jack as separate ports. Apps that have no device menu keep using one shared 
device, with nothing to set. For example, to give REAPER 12 inputs and 16 
outputs:

jackmoebius add REAPER --in private=12 --out private=16

(or with two pills in JackMate 2.1.0, which also keeps your cables when you 
change the channel count).

2. Much lower latency. I replaced the buffered bridge with a shared-memory 
bridge (Stéphane’s idea, set up over XPC). What JackMoebius adds itself is 
about 130 frames: 2.7 ms at 48 kHz, 1.4 to 1.5 ms at 88.2 and 96 kHz, on top of 
your app’s buffer and the Jack period. In my test (384-frame app buffer, Jack 
period of 128, 48 kHz) the round trip through JackMoebius goes from about 123 
ms to 10.7 ms, and with a 64-frame app buffer it’s about 4 ms in total. The 
method and the numbers are on this page, with a plot of how the cost stays flat 
across Jack periods and sample rates: https://jackmoebius.io/guide/latency.html

If you update, it’s worth knowing:

  *   Install the new package over the old one, then restart your Mac.
  *   Apps that used “JackMoebius In” or “JackMoebius Out” must select 
“JackMoebius” once.
  *   Update JackMate to 2.1.0 at the same time, the new features need it.
  *   The monitor outputs and the master switch are gone: an app that isn’t 
exposed in JackMate is silent, on purpose.

Release notes and download: https://jackmoebius.io<https://jackmoebius.io/>

Thanks again to everyone who asked for more output channels: this one is for 
you.

Feedback is always welcome, here or on GitHub: 
https://github.com/zinc75/JackMoebius/discussions

Best,

Eric

Le 9 oct. 2026 à 07:20, BAVU Eric <[email protected]> a écrit :


Hi all,

Thanks Yann! And thanks to everyone who sent me really nice feedback on 
JackMate 1.9.x, on the list or privately.

There’s one question I kept getting, in one form or another: “Cool, but is it a 
JackRouter replacement?” Basically: can I get my regular Mac apps into Jack? 
Back in April, the honest answer was no. JackMate only handled Jack and its 
native clients, and that pushed me to finally go after it for real (I’d been 
trying to crack it on and off for years…).

Well… now it’s a yes :-)

JackMate 2.0 just came out (https://jackmate.app<https://jackmate.app/>), and 
I’m releasing something alongside it: JackMoebius 
(https://jackmoebius.io<https://jackmoebius.io/>), a modern (and working!) 
successor to JackRouter. Heads up, this one’s a paid app at a very reasonable 
price (more on that below). I spent the last six months working hard on both 
apps so they really fit together.  I kept this news pretty quiet, only Stéphane 
Letz knew about it when it was almost ready this summer.

So what does JackMoebius do ? It brings any regular macOS app into the Jack 
graph (Safari, Music, FaceTime, Teams, Audacity, OBS…), each one showing up as 
its own Jack client, both ways. You get the app’s outputs, and Jack can feed 
its inputs too. So you can run a live instrument through a faust2jaqt effect 
and send it right back into a FaceTime call as your mic. And honestly that’s 
the most basic example. Once your apps are Jack clients, you can do pretty much 
anything.

If you like, here's is a quick demo video :  https://jackmoebius.io/#video  if 
you’d rather get the whole picture without reading further.


Under the hood, it’s an AudioServerPlugIn driver (runs in userspace, no kernel 
extension, no messing with SIP) plus a small Swift daemon that bridges 
CoreAudio and Jack. That’s a different road from the old AudioHardwarePlugIn 
API, the dead end that broke JackRouter 7 years ago. Each CoreAudio app keeps 
its own reserved audio channels from one session to the next, so your saved 
patchbay just comes back.

JackMate 2.0 drives the whole thing visually: pick which apps to expose, set 
per-app volumes, get warned when the routing’s off. Studios now bring back your 
exposed apps too, along with the Jack config and connections. And if you’d 
rather skip the GUI, JackMoebius also has a CLI and a IPC protocol, both 
documented online.

One more thing, for anyone who gave up on Jack on the Mac, thought it was dead, 
or got stuck on Gatekeeper warnings and Rosetta prompts (especially macOS 
newcomers) :

  *   JackMate and JackMoebius are both signed and notarized by Apple. No scary 
warnings, no Terminal tricks.

  *   JackMate now installs the official binaries of Jack for you in one click 
the first time you launch it. That’s a big deal for newcomers: the first Jack 
install on macOS used to be the scary part, and now it’s basically gone. It’s 
the official Jack 1.9.22 binaries, untouched, that I re-signed and got 
notarized by Apple, and I fixed the installer so it doesn’t ask for Rosetta on 
Apple Silicon anymore. It’s only a stopgap, though: falktx recently said on 
GitHub that upcoming Jack releases will be signed and notarized upstream, and 
as soon as a newer official release is out, JackMate will simply point you to 
it, and it’s really good news for the future of JACK on macOS. I really hope 
that gets a few students and colleagues to finally give Jack on macOS a go.

The practical bits:

  *   JackMate is still free and open source (MIT), and it’ll stay that way, 
like I said from day one: https://jackmate.app<https://jackmate.app/>
  *   JackMoebius: 14-day free trial (fully working), then €9.99 one-time 
(€29.99 for 5 Macs), with updates included for 1.x: 
https://jackmoebius.io<https://jackmoebius.io/>
  *   Both run on Intel and Apple Silicon, macOS 15 Sequoia or later.
  *   Only known issue: Zoom refuses virtual audio devices on macOS, so it’s 
blacklisted for now. Everything else I tried works fine.

Your feedback and questions are all welcome, here or on GitHub: 
https://github.com/zinc75/JackMoebius/discussions

Thanks again to the Faust community, and especially to Stéphane Letz for all 
the work he put for JACK on mac, and for his note on the clear reasons that 
prevented JackRouter to work on modern macOS system, which pointed me in the 
right direction of the AudioServerPlugin !

Best regards,

Éric

Le 14 avr. 2026 à 09:58, yann orlarey <[email protected]> a écrit :

Very nice! Thanks for sharing, Eric.

Yann

Le lun. 13 avr. 2026 à 18:41, BAVU Eric 
<[email protected]<mailto:[email protected]>> a écrit :
 Hi all,

I use Faust for many years and always loved it (we use it for many tasks in our 
lab, both on Linux and macOS, and the most of time with faust2jaqt scripts).

Faust targets many platforms and environments, so this will only be relevant to 
those of you working on macOS with Jack, but I thought it was worth sharing 
with the community.

Over the past few months I developed JackMate, a native Swift/SwiftUI 
application to start, configure and patch the Jack Audio server on macOS.

I always felt sad that JackPilot developed by sletz disappaeared from the 
ecosystem, and I even rewrote from scratch « JackCopilot » 5 years ago to 
revive it on our Apple devices in the lab.

JackMate is a much larger project, completely rewritten in swift/swiftui for 
modern macOS (≥ 15 Sequoia) and ease of use for both advanced users and 
beginners in mind.

For Faust users specifically, it works of course well alongside apps generated 
with faust2jaqt and faust2jack, and you can save complete sessions (Jack config 
+ patchbay connections + CLI client commands with arguments) as named Studios 
and reload them in one click (I somewhat recreated the concept of Ladish 
studios used by the Cadence suite, but this time on macOS).

If you’re interested, here is the website & documentation:

https://zinc75.github.io/JackMate/

You can inspect the source code of course (MIT License):

https://github.com/zinc75/JackMate

And you can install it easily with a DMG installer (Intel + Apple Silicon): 
https://github.com/zinc75/JackMate/releases/latest

The app has been tested on Intel Macbook Pro on Sequoia, Mac Studio M1 Max on 
Tahoe, and even on a macbook Neo on Tahoe (surprised to see it worked on an 
iphone processor, which appears to be more powerful than my old 2019 Intel 
Macbook Pro …)

I would be happy to hear any feedback from you and don’t hesitate to post 
issues on Github if you find any !

_______________________________________________
Faudiostream-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/faudiostream-users

_______________________________________________
Faudiostream-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/faudiostream-users

Reply via email to