Mike McLean schrieb: > [EMAIL PROTECTED] wrote: >> Note: kojira must be running and must have repo perms (perm_id 3) >> 1. import all srpms from the upstream RHEL/Fedora distribution, use >> --create-build >> koji import --create-build [SRPM] > > In Koji, builds are named after the srpm, i.e they use the e:n-v-r of > the source rpm. Because the SOURCERPM field of the rpm does not include > an epoch the system cannot be sure it has the correct data for the build > entry. So, by default, it only creates the build entry when importing an > srpm. > > The --create-build option causes import to create a build entry for an > rpm even if its srpm is not in the import batch. It will use the n-v-r > from the SOURCERPM field, and assume the epoch of the (missing) srpm is > the same as the epoch of the rpm. > > So --create-build should only be necessary when your import is missing > srpms. If you're importing Fedora content, I would hope this is not the > case. > >> 2. imprt all binary rpms (for each arch) >> koji import [RPM] > > The current import code in the koji cli will sort the srpms on the > command line into groups based on their srpm. It will automatically > import the srpms first and if there are rpms that do not have a > corresponding srpm or existing build entry (and --create-build is not > specified) it will warn and exit before taking any action. > > So, you should be able to collapse 1 and 2 into one command. > > I should also point out: if you're importing a large number of [s]rpms > that are already on the same filesystem as your koji store, then the > --link option may save you a lot of time. It requires that your (local) > user have permission to write to the koji work directory. It bypasses > the upload and instead simply hardlinks the file into the work directory > (where it would have been uploaded to anyway). > >> 3. create a tag, we'll call it mydist >> koji add-tag mydist >> koji edit-tag mydist --arches="x86_64 i386" > > add-tag supports a --arches argument to specify the initial arch list. > >> 4. add all untagged builds to that tag >> (use koji list-untagged to get the list) >> koji tag-pkg [package-n-v-r ... package-n-v-r] --force --nowait > > heh, that's a clever way to generate the n-v-r list during bootstrap :) > >> 9. add each host listed in "koji list-hosts" to createrepo channel >> # koji list-hosts >> # koji add-host-to-channel <name of builder> createrepo > > We put the repo tasks on a special channel because we found that some > hosts in our system were particularly slow at it. By leaving those hosts > out of the createrepo channel, we found we could improve overall repo > regeneration speed. > > It's also conceivable that you might want to keep some hosts out of the > createrepo pool simply to reduce load on them.
You might also want to take a look at http://wiki.linux-kernel.at/index.php/Koji :-) Best, Oliver -- Fedora-buildsys-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/fedora-buildsys-list
