-------------- Original message ---------------------- From: Brian Millett <bmill...@gmail.com> > > On Wed, 2009-02-04 at 21:17 +0000, William M. Quarles wrote: >> All memory tests were successful in the first pass. I also ran the, what was >> it, "bit decay test," or something like that, and it was successful on the >> first >> pass of that as well. >> >> However, I did notice something odd... this is a Pentium 4 system, 400 MHz >> FSB, 266 MHz DDR RAM... the testing program reported an FSB speed of 99 >> MHz... >> any thoughts on that? >> >> Any further suggestions that might trouble shoot this installation problem? >> > > > Well, if it is a heat problem then you might try the mighty blow. > Meaning grab the laptop, put mouth very close to the exhaust port and > BLOW. For my dell d820 it is just behind, to the left. Dust should > appear everywhere. It just might be a dust problem. > > Other than that, I'm not sure.
I used some canned air on the exhaust port and the openings for the chipset and CPU fans. Some dust came out of the exhaust port. I ran Dell Diagnostics on the laptop, and the only problems it had were minor and only on the floppy drive. It passed all of the other "extended" tests, including RAM, fans, and CPU thermistor. I still don't like how the Memtest detected a 99 MHz FSB, for some reason that is concerning me. Should I call upon the mighty Bugzilla at this point about the lockups, or try the general list? Peace, William _______________________________________________ Fedora-laptop-list mailing list Fedora-laptop-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-laptop-list
