Hmmm, Does that mean you have to have a config file in two different formats if you are using virsh? I configure/build my xen domains using virsh. Do I then need an xm compatible file too to have a vm startup? I'm sure not... if I recall correctly if you create a domain via the gui it starts automatically after boot and that only have xml config files but not sure how to "simulate" that if you create the domains using custom xml config files. Regards
________________________________ From: [EMAIL PROTECTED] on behalf of David Levinger Sent: Fri 2008/06/06 08:33 PM To: 'Marcel Damásio' Cc: [email protected] Subject: RE: [Fedora-xen] Autostart VM on boot I use virt-install to install my vm's as well, but when I used virt-manager (to install) I ran into that other directory path that you mentioned. To install a para-virt example with virt-install I use something like the following: virt-install --bridge=xenbr0 --name=machinename --ram=1024 --vcpus=1 --file=/dev/vgmachine/lvmachine --paravirt --location=http://1.1.1.1/pathto/ks -x "ks=http://1.1.1.1/config.cfg"; --vnc Below is an example of a Windows VM that I have that is stored in /etc/xen and worked just fine with the symlink method. If you'd like a linux example or a para-virt example just let me know. name = "MachineName" uuid = "f771623c-acbe-18df-d3a9-e71246c88f2e" maxmem = 1024 memory = 1024 vcpus = 2 builder = "hvm" kernel = "/usr/lib/xen/boot/hvmloader" boot = "c" pae = 1 acpi = 1 apic = 1 on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" device_model = "/usr/lib64/xen/bin/qemu-dm" sdl = 0 vnc = 1 vncunused = 1 disk = [ "phy:/dev/vgcomp/lvmachine,hda,w", "file:/root/bartpe.iso,hdb:cdrom,r" ] vif = [ "mac=00:00:00:00:00:00,bridge=eth0,type=ioemu" ] serial = "pty" ________________________________ From: Marcel Damásio [mailto:[EMAIL PROTECTED] Sent: Friday, June 06, 2008 12:21 PM To: David Levinger Cc: [email protected] Subject: Re: [Fedora-xen] Autostart VM on boot Ok, but I used virt-install to create the VMs, so I don't have a config file. Trying this solution I found the config files at /var/lib/xend/domains/, all generated by virt-install automatic. So I created a symlink in /etc/xen/auto, but this didn't work. Any other ideas? Could you send me an example of config file machine that works for testing? I don't know how to create a VM from one. On Fri, Jun 6, 2008 at 4:13 PM, David Levinger <[EMAIL PROTECTED]> wrote: Creating a symlink in /etc/xen/auto that points to the config file of the machine I want to autostart has worked for me in Fedora 8. IE I store my config files in /etc/xen ln -s /etc/xen/MachineFile /etc/xen/auto/MachineFile Next time I boot the virtual machine starts right up. d ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marcel Damásio Sent: Friday, June 06, 2008 11:51 AM To: [email protected] Subject: [Fedora-xen] Autostart VM on boot Hi, I'm using Fedora 8 as DOM0. I created my virtual machines using virt-install. Now I want to configure them to autostart on DOM0's boot, but I can't. I tried a lot of solutions, but none worked. Could somebody help me? -- Marcel Damásio Moreira 9º período de Ciência da Computação - UFES (27) 8128-7105 Estagiário do Suporte - DI/UFES -- Marcel Damásio Moreira 9º período de Ciência da Computação - UFES (27) 8128-7105 Estagiário do Suporte - DI/UFES -- Fedora-xen mailing list [email protected] https://www.redhat.com/mailman/listinfo/fedora-xen
