On Wed, Sep 18, 2019 at 7:54 AM Guo, Yejun <yejun....@intel.com> wrote: > > > > > -----Original Message----- > > From: Guo, Yejun > > Sent: Thursday, September 12, 2019 6:25 PM > > To: ffmpeg-devel@ffmpeg.org > > Cc: Guo, Yejun <yejun....@intel.com> > > Subject: [PATCH V9] avcodec/libvpxenc: add ROI-based encoding support for > > VP8/VP9 > > > > example command line to verify it: > > ./ffmpeg -i input.stream -vf addroi=0:0:iw/3:ih/3:-0.8 -c:v libvpx -b:v 2M > > tmp.webm > > > > Signed-off-by: Guo, Yejun <yejun....@intel.com> > > --- > > libavcodec/libvpxenc.c | 193 > > +++++++++++++++++++++++++++++++++++++++++++++++++ > > libavcodec/version.h | 2 +- > > 2 files changed, 194 insertions(+), 1 deletion(-) > > ping for review, thanks. > > btw, the version number in libavcodec/version.h has been changed again, > and I have to again rebase this patch. I hope to get comments if any and > so I can put all needed changes in a new V10 patch. >
lgtm. I can bump the version locally before pushing if there aren't any more comments. > > > > > diff --git a/libavcodec/libvpxenc.c b/libavcodec/libvpxenc.c > > index feb52ea..95100b5 100644 > > --- a/libavcodec/libvpxenc.c > > +++ b/libavcodec/libvpxenc.c > > @@ -116,6 +116,11 @@ typedef struct VPxEncoderContext { > > int tune_content; > > int corpus_complexity; > > int tpl_model; > > + /** > > + * If the driver does not support ROI then warn the first time we > > + * encounter a frame with ROI side data. > > + */ > > + int roi_warned; > > } VPxContext; > > > > /** String mappings for enum vp8e_enc_control_id */ > > @@ -1057,6 +1062,185 @@ static int queue_frames(AVCodecContext *avctx, > > AVPacket *pkt_out) > > return size; > > } > > > > +static int set_roi_map(AVCodecContext *avctx, const AVFrameSideData *sd, > > int frame_width, int frame_height, > > + vpx_roi_map_t *roi_map, int block_size, int > > segment_cnt) > > +{ > > + /** > > + * range of vpx_roi_map_t.delta_q[i] is [-63, 63] > > + */ > > +#define MAX_DELTA_Q 63 > > + > > + const AVRegionOfInterest *roi = NULL; > > + int nb_rois; > > + uint32_t self_size; > > + int segment_id; > > + > > + /* record the mapping from delta_q to "segment id + 1" in > > segment_mapping[]. > > + * the range of delta_q is [-MAX_DELTA_Q, MAX_DELTA_Q], > > + * and its corresponding array index is [0, 2 * MAX_DELTA_Q], > > + * and so the length of the mapping array is 2 * MAX_DELTA_Q + 1. > > + * "segment id + 1", so we can say there's no mapping if the value of > > array element is zero. > > + */ > > + int segment_mapping[2 * MAX_DELTA_Q + 1] = { 0 }; > > + > > + memset(roi_map, 0, sizeof(*roi_map)); > > + > > + /* segment id 0 in roi_map is reserved for the areas not covered by > > AVRegionOfInterest. > > + * segment id 0 in roi_map is also for the areas with > > AVRegionOfInterest.qoffset near 0. > > + * (delta_q of segment id 0 is 0). > > + */ > > + segment_mapping[MAX_DELTA_Q] = 1; > > + segment_id = 1; > > + > > + roi = (const AVRegionOfInterest*)sd->data; > > + self_size = roi->self_size; > > + if (!self_size || sd->size % self_size) { > > + av_log(avctx, AV_LOG_ERROR, "Invalid > > AVRegionOfInterest.self_size.\n"); > > + return AVERROR(EINVAL); > > + } > > + nb_rois = sd->size / self_size; > > + > > + /* This list must be iterated from zero because regions are > > + * defined in order of decreasing importance. So discard less > > + * important areas if they exceed the segment count. > > + */ > > + for (int i = 0; i < nb_rois; i++) { > > + int delta_q; > > + int mapping_index; > > + > > + roi = (const AVRegionOfInterest*)(sd->data + self_size * i); > > + if (!roi->qoffset.den) { > > + av_log(avctx, AV_LOG_ERROR, > > "AVRegionOfInterest.qoffset.den must not be zero.\n"); > > + return AVERROR(EINVAL); > > + } > > + > > + delta_q = (int)(roi->qoffset.num * 1.0f / roi->qoffset.den * > > MAX_DELTA_Q); > > + delta_q = av_clip(delta_q, -MAX_DELTA_Q, MAX_DELTA_Q); > > + > > + mapping_index = delta_q + MAX_DELTA_Q; > > + if (!segment_mapping[mapping_index]) { > > + if (segment_id == segment_cnt) { > > + av_log(avctx, AV_LOG_WARNING, > > + "ROI only supports %d segments (and segment 0 > > is reserved for non-ROIs), skipping the left ones.\n", > > + segment_cnt); > > + break; > > + } > > + > > + segment_mapping[mapping_index] = segment_id + 1; > > + roi_map->delta_q[segment_id] = delta_q; > > + segment_id++; > > + } > > + } > > + > > + roi_map->rows = (frame_height + block_size - 1) / block_size; > > + roi_map->cols = (frame_width + block_size - 1) / block_size; > > + roi_map->roi_map = av_mallocz_array(roi_map->rows * roi_map->cols, > > sizeof(*roi_map->roi_map)); > > + if (!roi_map->roi_map) { > > + av_log(avctx, AV_LOG_ERROR, "roi_map alloc failed.\n"); > > + return AVERROR(ENOMEM); > > + } > > + > > + /* This list must be iterated in reverse, so for the case that > > + * two regions are overlapping, the more important area takes effect. > > + */ > > + for (int i = nb_rois - 1; i >= 0; i--) { > > + int delta_q; > > + int mapping_value; > > + int starty, endy, startx, endx; > > + > > + roi = (const AVRegionOfInterest*)(sd->data + self_size * i); > > + > > + starty = av_clip(roi->top / block_size, 0, roi_map->rows); > > + endy = av_clip((roi->bottom + block_size - 1) / block_size, 0, > > roi_map->rows); > > + startx = av_clip(roi->left / block_size, 0, roi_map->cols); > > + endx = av_clip((roi->right + block_size - 1) / block_size, 0, > > roi_map->cols); > > + > > + delta_q = (int)(roi->qoffset.num * 1.0f / roi->qoffset.den * > > MAX_DELTA_Q); > > + delta_q = av_clip(delta_q, -MAX_DELTA_Q, MAX_DELTA_Q); > > + > > + mapping_value = segment_mapping[delta_q + MAX_DELTA_Q]; > > + if (mapping_value) { > > + for (int y = starty; y < endy; y++) > > + for (int x = startx; x < endx; x++) > > + roi_map->roi_map[x + y * roi_map->cols] = > > mapping_value - 1; > > + } > > + } > > + > > + return 0; > > +} > > + > > +static int vp9_encode_set_roi(AVCodecContext *avctx, int frame_width, int > > frame_height, const AVFrameSideData *sd) > > +{ > > + VPxContext *ctx = avctx->priv_data; > > + > > +#ifdef VPX_CTRL_VP9E_SET_ROI_MAP > > + int version = vpx_codec_version(); > > + int major = VPX_VERSION_MAJOR(version); > > + int minor = VPX_VERSION_MINOR(version); > > + int patch = VPX_VERSION_PATCH(version); > > + > > + if (major > 1 || (major == 1 && minor > 8) || (major == 1 && minor == 8 > > && patch >= 1)) { > > + vpx_roi_map_t roi_map; > > + const int segment_cnt = 8; > > + const int block_size = 8; > > + int ret; > > + > > + if (ctx->aq_mode > 0 || ctx->cpu_used < 5 || ctx->deadline != > > VPX_DL_REALTIME) { > > + if (!ctx->roi_warned) { > > + ctx->roi_warned = 1; > > + av_log(avctx, AV_LOG_WARNING, "ROI is only enabled > > when aq_mode is 0, cpu_used >= 5 " > > + "and deadline is > > REALTIME, so skipping ROI.\n"); > > + return AVERROR(EINVAL); > > + } > > + } > > + > > + ret = set_roi_map(avctx, sd, frame_width, frame_height, &roi_map, > > block_size, segment_cnt); > > + if (ret) { > > + log_encoder_error(avctx, "Failed to set_roi_map.\n"); > > + return ret; > > + } > > + > > + memset(roi_map.ref_frame, -1, sizeof(roi_map.ref_frame)); > > + > > + if (vpx_codec_control(&ctx->encoder, VP9E_SET_ROI_MAP, > > &roi_map)) { > > + log_encoder_error(avctx, "Failed to set VP9E_SET_ROI_MAP > > codec control.\n"); > > + ret = AVERROR_INVALIDDATA; > > + } > > + av_freep(&roi_map.roi_map); > > + return ret; > > + } > > +#endif > > + > > + if (!ctx->roi_warned) { > > + ctx->roi_warned = 1; > > + av_log(avctx, AV_LOG_WARNING, "ROI is not supported, please > > upgrade libvpx to version >= 1.8.1. " > > + "You may need to rebuild > > ffmpeg.\n"); > > + } > > + return 0; > > +} > > + > > +static int vp8_encode_set_roi(AVCodecContext *avctx, int frame_width, int > > frame_height, const AVFrameSideData *sd) > > +{ > > + vpx_roi_map_t roi_map; > > + const int segment_cnt = 4; > > + const int block_size = 16; > > + VPxContext *ctx = avctx->priv_data; > > + > > + int ret = set_roi_map(avctx, sd, frame_width, frame_height, &roi_map, > > block_size, segment_cnt); > > + if (ret) { > > + log_encoder_error(avctx, "Failed to set_roi_map.\n"); > > + return ret; > > + } > > + > > + if (vpx_codec_control(&ctx->encoder, VP8E_SET_ROI_MAP, &roi_map)) { > > + log_encoder_error(avctx, "Failed to set VP8E_SET_ROI_MAP codec > > control.\n"); > > + ret = AVERROR_INVALIDDATA; > > + } > > + > > + av_freep(&roi_map.roi_map); > > + return ret; > > +} > > + > > static int vpx_encode(AVCodecContext *avctx, AVPacket *pkt, > > const AVFrame *frame, int *got_packet) > > { > > @@ -1068,6 +1252,7 @@ static int vpx_encode(AVCodecContext *avctx, > > AVPacket *pkt, > > vpx_enc_frame_flags_t flags = 0; > > > > if (frame) { > > + const AVFrameSideData *sd = av_frame_get_side_data(frame, > > AV_FRAME_DATA_REGIONS_OF_INTEREST); > > rawimg = &ctx->rawimg; > > rawimg->planes[VPX_PLANE_Y] = frame->data[0]; > > rawimg->planes[VPX_PLANE_U] = frame->data[1]; > > @@ -1113,6 +1298,14 @@ static int vpx_encode(AVCodecContext *avctx, > > AVPacket *pkt, > > flags |= strtoul(en->value, NULL, 10); > > } > > } > > + > > + if (sd) { > > + if (avctx->codec_id == AV_CODEC_ID_VP8) { > > + vp8_encode_set_roi(avctx, frame->width, frame->height, > > sd); > > + } else { > > + vp9_encode_set_roi(avctx, frame->width, frame->height, > > sd); > > + } > > + } > > } > > > > res = vpx_codec_encode(&ctx->encoder, rawimg, timestamp, > > diff --git a/libavcodec/version.h b/libavcodec/version.h > > index b4b79ef..5748d31 100644 > > --- a/libavcodec/version.h > > +++ b/libavcodec/version.h > > @@ -29,7 +29,7 @@ > > > > #define LIBAVCODEC_VERSION_MAJOR 58 > > #define LIBAVCODEC_VERSION_MINOR 56 > > -#define LIBAVCODEC_VERSION_MICRO 101 > > +#define LIBAVCODEC_VERSION_MICRO 102 > > > > #define LIBAVCODEC_VERSION_INT > > AV_VERSION_INT(LIBAVCODEC_VERSION_MAJOR, \ > > > > LIBAVCODEC_VERSION_MINOR, \ > > -- > > 2.7.4 > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe". _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".