On Mon, 13. Jan 10:56, Gyan wrote: > > > On 13-01-2020 09:41 am, Andriy Gelman wrote: > > From: Andriy Gelman <andriy.gel...@gmail.com> > > > > Signed-off-by: Andriy Gelman <andriy.gel...@gmail.com> > > --- > > doc/decoders.texi | 12 ++++++++++++ > > doc/encoders.texi | 27 +++++++++++++++++++++++++++ > > 2 files changed, 39 insertions(+) > > > > diff --git a/doc/decoders.texi b/doc/decoders.texi > > index f18226b3504..222f681810b 100644 > > --- a/doc/decoders.texi > > +++ b/doc/decoders.texi > > @@ -86,6 +86,18 @@ AVS2-P2/IEEE1857.4 video decoder wrapper. > > This decoder allows libavcodec to decode AVS2 streams with davs2 library. > > +@section v4l2m2m > > + > > +@command{ffmpeg} supports a set of v4l2m2m wrappers for interfacing with > > +hardware decoders. Depending on the hardware's capabilties the following > > decoders may be selected: > > +h264, hevc, mpeg1, mpeg2, mpeg4, h263, vc1, vp8, and vp9.
> > If these decoders are available through lavc API then replace ffmpeg with > libavcodec. Thanks, will update. > Is there a command for a user to identify which decoder/encoders > are available? At the moment this doesn't exist. But I do have a patch that lists the supported encoders/decoders. I'll send this in the next version. > > Also, s/capabilties/capabilities > > > + > > +To use a specifix decoder append a _v4l2m2m suffix. For example to select > > h264 > s/specifix/specific will update both. > > > +decoder use: > > +@example > > +ffmpeg -codec:v h264_v4l2m2m -i INPUT OUTPUT > > +@end example > > + > > @c man end VIDEO DECODERS > > @chapter Audio Decoders > > diff --git a/doc/encoders.texi b/doc/encoders.texi > > index 61e674cf968..6cb43aedbce 100644 > > --- a/doc/encoders.texi > > +++ b/doc/encoders.texi > > @@ -3117,6 +3117,33 @@ required to produce a stream usable with all > > decoders. > > @end table > > +@section v4l2m2m > > + > > +@command{ffmpeg} supports a set of v4l2m2m wrappers for interfacing with > > hardware encoders. > > +Depending on the hardware's capabilties the following encoders may be > > selected: > > +mpeg4, h263, h264, hevc, and vp8. > > Same notes as for decoders. > > > + > > +To use a specific encoder append _v4l2m2m suffix. For example to select > > h264 use: > > +@example > > +ffmpeg -i INPUT [-pix_fmt pixfmt] -codec:v h264_v4l2m2m OUTPUT > > +@end example > > +In some cases, it may be necessary to insert a pixel format conversion with > > +@code{-pix_fmt} option. This is required if the pixel format of the input > > does not > > +match the format of the encoder. If there is a mismatch, @command{ffmpeg} > > will > > +exit and specify the required pixfmt to use. > > + > > +The following standard libavcodec options are supported: > > +@itemize > > +@item > > +@option{g} / @option{gop_size} > > +@item > > +@option{qpel} > > +@item > > +@option{qmin} > > +@item > > +@option{qmax} > > +@end itemize > > + > > I see both the decoder and encoder wrappers have options for nb of capture > and output buffers. Should document these with description, range and > default values. yep, will add this. Thanks, -- Andriy _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".