Can you not user 2 v4l2 devices at once as input? I have a Pi with 2 camera and
I am trying to take input from both concurrently.
/dev/video0 and /dev/video1 work when used one at a time.
pi@picam2:~ $ /usr/bin/arecord -D dmic_sv -c2 -r 44100 -f S32_LE |
> /usr/local/bin/ffmpeg -y -thread_queue_size 10240 -f v4l2 -i /dev/video0 \
> -thread_queue_size 10240 -f v4l2 -i /dev/video1 -ac:2 2
> -thread_queue_size 10240 -i - \
> -filter_complex "[0][1] overlay=5:main_h-overlay_h-5" -acodec aac -f flv
> -ar 44100 -f flv test.mp4
Recording WAVE 'stdin' : Signed 32 bit Little Endian, Rate 44100 Hz, Stereo
ffmpeg version N-96343-g029cc9883f Copyright (c) 2000-2020 the FFmpeg developers
built with gcc 8 (Raspbian 8.3.0-6+rpi1)
configuration: --enable-network --enable-protocol=tcp --enable-protocol=udp
--enable-demuxer=rtsp --enable-decoder=h264 --enable-gpl --enable-libx264
--enable-nonfree --enable-decoder=h264_mmal --enable-encoder=h264_omx
--enable-mmal --enable-omx --enable-omx-rpi --enable-libfreetype
libavutil 56. 38.100 / 56. 38.100
libavcodec 58. 65.103 / 58. 65.103
libavformat 58. 35.102 / 58. 35.102
libavdevice 58. 9.103 / 58. 9.103
libavfilter 7. 71.100 / 7. 71.100
libswscale 5. 6.100 / 5. 6.100
libswresample 3. 6.100 / 3. 6.100
libpostproc 55. 6.100 / 55. 6.100
Input #0, video4linux2,v4l2, from '/dev/video0':
Duration: N/A, start: 270.532881, bitrate: 283115 kb/s
Stream #0:0: Video: rawvideo (I420 / 0x30323449), yuv420p, 1024x768, 283115
kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
[video4linux2,v4l2 @ 0x260d190] ioctl(VIDIOC_STREAMON): Invalid argument
/dev/video1: Invalid argument
_______________________________________________
ffmpeg-user mailing list
[email protected]
https://ffmpeg.org/mailman/listinfo/ffmpeg-user
To unsubscribe, visit link above, or email
[email protected] with subject "unsubscribe".
