Apologies, it makes sense if it chooses from a list of recognized values. Thx for all the help and patience!
On Sun, 7 Feb 2021 at 14:52, Paul B Mahol <[email protected]> wrote: > This is because it does not allow arbitrary values, just some small set. > > On Sun, Feb 7, 2021 at 3:51 PM Paul B Mahol <[email protected]> wrote: > > > > > > > On Sun, Feb 7, 2021 at 3:49 PM Thibeau <[email protected]> > > wrote: > > > >> It is very strange that if you change the value you set comment from > >> 'Cover > >> (front)' to e.g 'Cover' it will set the tag to cover but ffmpeg won't > >> recognize it and display it as Other any ideas why this is? > >> > > > > Because if your set value does not match any from specification section I > > linked previously > > it will pick first entry, And first entry is "Other". > > > > > >> > >> On Sun, 7 Feb 2021 at 11:03, Thibeau <[email protected]> > >> wrote: > >> > >> > First ffprobe shows before executing ffmpeg command . I installed the > >> git > >> > version for ffmpeg to make sure it was the same as yours. It seems > >> you're > >> > infact corrrect and it allows for you to set the tag to another and > >> value > >> > and will default to Other. Thx for the help of explaining it. Didn't > >> find > >> > the docs on my own so thx for giving a link to them. > >> > Don't know alot about ffmpeg either but adding -vsync 2 to your > command > >> > would seem like a good idea no? Than the error in the command (see > >> second > >> > command [2]) would go away. Unless I'm mistaken and it's intent to be > >> not > >> > use vsync 2 method. > >> > -------------------------- [1] > >> > ffprobe '29 My Girl.flac' > >> > ffprobe version N-100998-g134193a2ff Copyright (c) 2007-2021 the > FFmpeg > >> > developers > >> > built with gcc 9.3.0 (Gentoo 9.3.0-r2 p4) > >> > configuration: --prefix=/usr --libdir=/usr/lib64 > --shlibdir=/usr/lib64 > >> > --docdir=/usr/share/doc/ffmpeg-9999/html --mandir=/usr/share/man > >> > --enable-shared --cc=x86_64-pc-linux-gnu-gcc > >> --cxx=x86_64-pc-linux-gnu-g++ > >> > --ar=x86_64-pc-linux-gnu-ar --nm=x86_64-pc-linux-gnu-nm > >> > --ranlib=x86_64-pc-linux-gnu-ranlib > >> > --pkg-config=x86_64-pc-linux-gnu-pkg-config --optflags='-march=native > >> -O3 > >> > -pipe -flto=5 -fgraphite-identity -floop-nest-optimize > -ftree-vectorize > >> > -fsched-pressure -fipa-pta -fno-semantic-interposition > >> -fuse-linker-plugin > >> > -fno-common -fdevirtualize-at-ltrans -falign-functions=32 > >> > --param=l1-cache-size=32 --param=l1-cache-line-size=64 > >> > --param=l2-cache-size=6144' --disable-static --enable-avfilter > >> > --enable-avresample --disable-stripping --disable-optimizations > >> > --disable-libcelt --enable-nonfree --disable-indev=v4l2 > >> > --disable-outdev=v4l2 --disable-indev=oss --disable-indev=jack > >> > --disable-outdev=oss --enable-bzlib --disable-runtime-cpudetect > >> > --disable-debug --disable-gcrypt --enable-gnutls --disable-gmp > >> --enable-gpl > >> > --disable-hardcoded-tables --enable-iconv --disable-libtls > >> > --disable-libxml2 --disable-lzma --disable-network --disable-opencl > >> > --enable-openssl --enable-postproc --disable-libsmbclient > >> --disable-ffplay > >> > --disable-sdl2 --disable-vaapi --disable-vdpau --disable-vulkan > >> > --enable-xlib --enable-libxcb --enable-libxcb-shm > --enable-libxcb-xfixes > >> > --enable-zlib --disable-libcdio --disable-libiec61883 > >> --disable-libdc1394 > >> > --enable-libcaca --disable-openal --disable-opengl --disable-libv4l2 > >> > --disable-libpulse --enable-libdrm --disable-libjack > >> > --disable-libopencore-amrwb --disable-libopencore-amrnb > >> --disable-libcodec2 > >> > --enable-libdav1d --disable-libfdk-aac --disable-libopenjpeg > >> > --enable-libbluray --disable-libgme --disable-libgsm > >> --disable-libaribb24 > >> > --disable-mmal --disable-libmodplug --enable-libopus --disable-libilbc > >> > --disable-librtmp --disable-libssh --disable-libspeex --disable-libsrt > >> > --enable-librsvg --disable-ffnvcodec --enable-libvorbis > --disable-libvpx > >> > --disable-libzvbi --disable-appkit --disable-libbs2b > >> --disable-chromaprint > >> > --disable-cuda-llvm --disable-libflite > >> > --disable-frei0r --disable-libfribidi --enable-fontconfig > >> --disable-ladspa > >> > --disable-libass --disable-libtesseract --disable-lv2 > >> --enable-libfreetype > >> > --disable-libvidstab --disable-librubberband --disable-libzmq > >> > --disable-libzimg --disable-libsoxr --enable-pthreads > >> > --disable-libvo-amrwbenc --enable-libmp3lame --disable-libkvazaar > >> > --disable-libaom --disable-libopenh264 --disable-librav1e > >> > --disable-libsnappy --disable-libtheora --disable-libtwolame > >> > --disable-libwebp --disable-libx264 --disable-libx265 > --disable-libxvid > >> > --disable-gnutls --disable-armv5te --disable-armv6 --disable-armv6t2 > >> > --disable-neon --disable-vfp --disable-vfpv3 --disable-armv8 > >> > --disable-mipsdsp --disable-mipsdspr2 --disable-mipsfpu > >> --disable-altivec > >> > --disable-vsx --disable-power8 --disable-amd3dnow > --disable-amd3dnowext > >> > --disable-fma4 --disable-xop --cpu=host --enable-lto --disable-doc > >> > --disable-htmlpages --enable-manpages > >> > libavutil 56. 64.100 / 56. 64.100 > >> > libavcodec 58.121.100 / 58.121.100 > >> > libavformat 58. 67.100 / 58. 67.100 > >> > libavdevice 58. 11.103 / 58. 11.103 > >> > libavfilter 7.102.100 / 7.102.100 > >> > libavresample 4. 0. 0 / 4. 0. 0 > >> > libswscale 5. 8.100 / 5. 8.100 > >> > libswresample 3. 8.100 / 3. 8.100 > >> > libpostproc 55. 8.100 / 55. 8.100 > >> > Input #0, flac, from '29 My Girl.flac': > >> > Metadata: > >> > ALBUM : Prodigal Son: Season 1 (Original Television > >> > Soundtrack) > >> > ARTIST : Nathaniel Blume > >> > DATE : 2020 > >> > TITLE : My Girl > >> > track : 29 > >> > Duration: 00:02:55.60, start: 0.000000, bitrate: 1424 kb/s > >> > Stream #0:0: Audio: flac, 44100 Hz, stereo, s32 (24 bit) > >> > Stream #0:1: Video: mjpeg (Baseline), yuvj444p(pc, > >> > bt470bg/unknown/unknown), 640x640 [SAR 118:118 DAR 1:1], 90k tbr, 90k > >> tbn, > >> > 90k tbc (attached pic) > >> > Metadata: > >> > comment : Other > >> > ---------------------------------------- [1] > >> > --------------------------------- [2] > >> > brandon@NKWTMEID /tmp/x $ ffmpeg -i '29 My Girl.flac' -c:v png > >> > -disposition:v:1 attached_pic -metadata:s:v:0 comment="Cover (front)" > >> > out.flac > >> > ffmpeg version N-100998-g134193a2ff Copyright (c) 2000-2021 the FFmpeg > >> > developers > >> > built with gcc 9.3.0 (Gentoo 9.3.0-r2 p4) > >> > configuration: --prefix=/usr --libdir=/usr/lib64 > --shlibdir=/usr/lib64 > >> > --docdir=/usr/share/doc/ffmpeg-9999/html > >> > --mandir=/usr/share/man --enable-shared --cc=x86_64-pc-linux-gnu-gcc > >> > --cxx=x86_64-pc-linux-gnu-g++ --ar=x86_64-pc-linux-gnu-ar > >> > --nm=x86_64-pc-linux-gnu-nm --ranlib=x86_64-pc-linux-gnu-ranlib > >> > --pkg-config=x86_64-pc-linux-gnu-pkg-config --optflags='-march=native > >> -O3 > >> > -pipe -flto=5 -fgraphite-identity -floop-nest-optimize > -ftree-vectorize > >> > -fsched-pressure -fipa-pta -fno-semantic-interposition > >> -fuse-linker-plugin > >> > -fno-common -fdevirtualize-at-ltrans -falign-functions=32 > >> > --param=l1-cache-size=32 --param=l1-cache-line-size=64 > >> > --param=l2-cache-size=6144' --disable-static > >> > --enable-avfilter --enable-avresample --disable-stripping > >> > --disable-optimizations --disable-libcelt --enable-nonfree > >> > --disable-indev=v4l2 --disable-outdev=v4l2 --disable-indev=oss > >> > --disable-indev=jack --disable-outdev=oss --enable-bzlib > >> > --disable-runtime-cpudetect --disable-debug --disable-gcrypt > >> > --enable-gnutls --disable-gmp --enable-gpl --disable-hardcoded-tables > >> > --enable-iconv --disable-libtls --disable-libxml2 --disable-lzma > >> > --disable-network --disable-opencl --enable-openssl --enable-postproc > >> > --disable-libsmbclient --disable-ffplay --disable-sdl2 --disable-vaapi > >> > --disable-vdpau --disable-vulkan --enable-xlib --enable-libxcb > >> > --enable-libxcb-shm --enable-libxcb-xfixes --enable-zlib > >> --disable-libcdio > >> > --disable-libiec61883 --disable-libdc1394 --enable-libcaca > >> --disable-openal > >> > --disable-opengl --disable-libv4l2 --disable-libpulse --enable-libdrm > >> > --disable-libjack --disable-libopencore-amrwb > >> --disable-libopencore-amrnb > >> > --disable-libcodec2 --enable-libdav1d --disable-libfdk-aac > >> > --disable-libopenjpeg --enable-libbluray --disable-libgme > >> --disable-libgsm > >> > --disable-libaribb24 --disable-mmal --disable-libmodplug > >> --enable-libopus > >> > --disable-libilbc --disable-librtmp --disable-libssh > --disable-libspeex > >> > --disable-libsrt --enable-librsvg --disable-ffnvcodec > --enable-libvorbis > >> > --disable-libvpx --disable-libzvbi --disable-appkit --disable-libbs2b > >> > --disable-chromaprint --disable-cuda-llvm --disable-libflite > >> > --disable-frei0r --disable-libfribidi --enable-fontconfig > >> --disable-ladspa > >> > --disable-libass --disable-libtesseract --disable-lv2 > >> --enable-libfreetype > >> > --disable-libvidstab --disable-librubberband --disable-libzmq > >> > --disable-libzimg --disable-libsoxr --enable-pthreads > >> > --disable-libvo-amrwbenc --enable-libmp3lame --disable-libkvazaar > >> > --disable-libaom --disable-libopenh264 --disable-librav1e > >> > --disable-libsnappy --disable-libtheora --disable-libtwolame > >> > --disable-libwebp --disable-libx264 --disable-libx265 > --disable-libxvid > >> > --disable-gnutls --disable-armv5te --disable-armv6 --disable-armv6t2 > >> > --disable-neon --disable-vfp --disable-vfpv3 --disable-armv8 > >> > --disable-mipsdsp --disable-mipsdspr2 --disable-mipsfpu > >> --disable-altivec > >> > --disable-vsx --disable-power8 --disable-amd3dnow > --disable-amd3dnowext > >> > --disable-fma4 --disable-xop --cpu=host --enable-lto --disable-doc > >> > --disable-htmlpages --enable-manpages > >> > libavutil 56. 64.100 / 56. 64.100 > >> > libavcodec 58.121.100 / 58.121.100 > >> > libavformat 58. 67.100 / 58. 67.100 > >> > libavdevice 58. 11.103 / 58. 11.103 > >> > libavfilter 7.102.100 / 7.102.100 > >> > libavresample 4. 0. 0 / 4. 0. 0 > >> > libswscale 5. 8.100 / 5. 8.100 > >> > libswresample 3. 8.100 / 3. 8.100 > >> > libpostproc 55. 8.100 / 55. 8.100 > >> > Input #0, flac, from '29 My Girl.flac': > >> > Metadata: > >> > ALBUM : Prodigal Son: Season 1 (Original Television > >> > Soundtrack) > >> > ARTIST : Nathaniel Blume > >> > DATE : 2020 > >> > TITLE : My Girl > >> > track : 29 > >> > Duration: 00:02:55.60, start: 0.000000, bitrate: 1424 kb/s > >> > Stream #0:0: Audio: flac, 44100 Hz, stereo, s32 (24 bit) > >> > Stream #0:1: Video: mjpeg (Baseline), yuvj444p(pc, > >> > bt470bg/unknown/unknown), 640x640 [SAR 118:118 DAR 1:1], 90k > >> > tbr, 90k tbn, 90k tbc (attached pic) > >> > Metadata: > >> > comment : Other > >> > Stream mapping: > >> > Stream #0:1 -> #0:0 (mjpeg (native) -> png (native)) > >> > Stream #0:0 -> #0:1 (flac (native) -> flac (native)) > >> > Press [q] to stop, [?] for help > >> > [swscaler @ 0x5555a8fd5d00] deprecated pixel format used, make sure > you > >> > did set range correctly > >> > [flac @ 0x5555a8f532c0] Frame rate very high for a muxer not > efficiently > >> > supporting it. > >> > Please consider specifying a lower framerate, a different muxer or > >> -vsync 2 > >> > Output #0, flac, to 'out.flac': > >> > Metadata: > >> > ALBUM : Prodigal Son: Season 1 (Original Television > >> > Soundtrack) > >> > ARTIST : Nathaniel Blume > >> > DATE : 2020 > >> > TITLE : My Girl > >> > track : 29 > >> > encoder : Lavf58.67.100 > >> > Stream #0:0: Video: png, rgb24(pc, bt470bg/unknown/unknown, > >> > progressive), 640x640 [SAR 1:1 DAR 1:1], q=2-31, 200 kb/s, 90k fps, > 90k > >> tbn > >> > (attached pic) > >> > Metadata: > >> > comment : Cover (front) > >> > encoder : Lavc58.121.100 png > >> > Stream #0:1: Audio: flac, 44100 Hz, stereo, s32 (24 bit), 128 kb/s > >> > Metadata: > >> > encoder : Lavc58.121.100 flac > >> > frame= 1 fps=0.0 q=-0.0 Lsize= 31013kB time=00:02:55.60 > >> > bitrate=1446.8kbits/s speed= 359x > >> > video:565kB audio:30440kB subtitle:0kB other streams:0kB global > >> > headers:0kB muxing overhead: 0.026684% > >> > --------------------- [1] > >> > > >> > On Sun, 7 Feb 2021 at 10:35, Paul B Mahol <[email protected]> wrote: > >> > > >> >> On Sun, Feb 7, 2021 at 11:19 AM Paul B Mahol <[email protected]> > wrote: > >> >> > >> >> > > >> >> > > >> >> > On Sun, Feb 7, 2021 at 12:59 AM MediaMouth <[email protected]> > >> wrote: > >> >> > > >> >> >> On Feb 6, 2021, at 3:32 PM, Paul B Mahol <[email protected]> > wrote: > >> >> >> > > >> >> >> > Can you share file? > >> >> >> Yes. The O.P. made it available here: https://ufile.io/bgunj34e > < > >> >> >> https://ufile.io/bgunj34e> > >> >> >> > >> >> >> > > >> >> >> > ffmpeg -i INPUT.png -i AUDIO.flac -map:v 0 -metadata > comment=Other > >> >> >> > -disposition:v:0 attached_pic -map:a 1 -metadata album=test > >> >> FINAL.flac > >> >> >> > > >> >> >> > Note that metadata order is important. The command above adds > >> comment > >> >> >> > metadata to video stream. > >> >> >> > >> >> >> Thanks for posting. Clear and helpful. Unfortunately, I got an > >> error > >> >> >> Here are the steps I did... > >> >> >> > >> >> > > >> >> > Your steps are all invalid. Why you put first audio then video? > >> >> > My command only works with first video stream and after that audio > >> >> stream. > >> >> > In ffmpeg every item position matters. > >> >> > > >> >> > >> >> Also you can not remove description of attached picture at all. > >> "Other" is > >> >> just default value if no other valid values are set. > >> >> You can change value to "Cover (front)" if you like, please read 4.14 > >> >> section of https://id3.org/id3v2.4.0-frames > >> >> > >> >> So command to change Other to Cover is: > >> >> ffmpeg -i INPUT.flac -c:v png -disposition:v:1 attached_pic > >> >> -metadata:s:v:0 > >> >> comment="Cover (front)" OUTPUT.flac > >> >> > >> >> > >> >> > >> >> > > >> >> > > >> >> >> ffmpeg -i '29 My Girl.flac' -an -vcodec copy '29 My Girl.png'; > >> #Extract > >> >> >> the album art to an external file. > >> >> >> ffmpeg -i '29 My Girl.flac' -map 0 -map -0:v:0 -c copy '29 My > >> >> >> Girl-NoArt.flac'; #Remove the album art, save results to a new > .flac > >> >> file. > >> >> >> ffmpeg -i '29 My Girl-NoArt.flac' -i '29 My Girl.png' -map:v 0 > >> >> -metadata > >> >> >> comment=SomethingOtherThanOther -disposition:v:0 attached_pic > >> -map:a 1 > >> >> >> -metadata comment= '29 My Girl-ReArt.flac'; #Add the album art > back > >> >> using > >> >> >> the metadata commands as you suggest, and store to yet another > .flac > >> >> file. > >> >> >> Error received: [swscaler @ 0x7f9648038000] deprecated pixel > format > >> >> >> used, make sure you did set range correctly > >> >> >> > >> >> >> > >> >> >> _______________________________________________ > >> >> >> ffmpeg-user mailing list > >> >> >> [email protected] > >> >> >> https://ffmpeg.org/mailman/listinfo/ffmpeg-user > >> >> >> > >> >> >> To unsubscribe, visit link above, or email > >> >> >> [email protected] with subject "unsubscribe". > >> >> > > >> >> > > >> >> _______________________________________________ > >> >> ffmpeg-user mailing list > >> >> [email protected] > >> >> https://ffmpeg.org/mailman/listinfo/ffmpeg-user > >> >> > >> >> To unsubscribe, visit link above, or email > >> >> [email protected] with subject "unsubscribe". > >> > > >> > > >> _______________________________________________ > >> ffmpeg-user mailing list > >> [email protected] > >> https://ffmpeg.org/mailman/listinfo/ffmpeg-user > >> > >> To unsubscribe, visit link above, or email > >> [email protected] with subject "unsubscribe". > > > > > _______________________________________________ > ffmpeg-user mailing list > [email protected] > https://ffmpeg.org/mailman/listinfo/ffmpeg-user > > To unsubscribe, visit link above, or email > [email protected] with subject "unsubscribe". _______________________________________________ ffmpeg-user mailing list [email protected] https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email [email protected] with subject "unsubscribe".
