Getting off the filmscanning topic, but worth saying, I
think:
>From reading the Piezography mailing list, not from
practical experience, I understand that banding can happen
with this system because of slightly inaccurate paper
feeding. Some Epson 3000 printers misbehave in this way, and
some don't. With the Epson 1160 printer this problem is less
prevalent.
As far as 6 ink printers for the Cone system are concerned,
I understand the extra inks have no benefit in output
quality. On the downside, the 6 ink set is available only in
cartridges, not in bulk for use through a continuous inking
system.
Details of the Piezography mailing list, and much else, are
at http://www.inkjetmall.com/store/piezographyBW.html
Peter Marquis-Kyle
----- Original Message -----
From: <[EMAIL PROTECTED]>
> In a message dated 1/10/01 4:40:35 PM US Eastern Standard
Time,
> [EMAIL PROTECTED] writes:
>
> << filmscanners: but which printer is good enough?Where
does one get info on
> the Cone quadtone inks? Thanks >>
>
> Beware Cone quadtone setup for Epson 3000 - the inks are
great, but the
> driver overdrives the printer, which can never keep up and
produces banding
> no matter what... if you go with Cone inks, probably one
of hte 6 ink printer
> will give better results...
>
> D.
>
