Polaroid suggests the use of Adaptec products and will offer technical support. I have the Adaptec AIC 7850 and Win XP has no problems with it. The scanner needs a 50 pin Centronics M or DB-25M connector.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Arthur Entlich Sent: Friday, September 06, 2002 9:25 PM To: [EMAIL PROTECTED] Subject: [filmscanners] Which SCSI Card for SS4000 Someone who is not yet subscribed here is buying a SS4000 scanner and wanted to know which is the best SCSI card to use with the scanner on a PC, with, I assume, PCI interfacing. Also, he was wondering which type of SCSI cable he needs (he wanted to pre-purchase the cable, as it isn't coming with the purchase). What SCSI II cable plug does the scanner use, and what is required on the Card end? I haven't used an SS4000, only the SS4000+ which uses USB and Firewire, and I can't recall what the SS4000 "rear" looks like. Thanks, Art ------------------------------------------------------------------------ ---------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body