Hi Tom, Possibly termination? I don't remember, but is that device permanently terminated, or is there a switch to enable internal termination? If you don't use the internal termination, and it's the last device in the SCSI chain, you do have to provide a terminator either in-line where the cable attaches to the unit, or on the "other" port. It typically is best to use the internal termination, since it's active termination, which is better.
Regards, Austin > My instructions indicated that but since it didn't work with the 25pin > connector and did work with the SCSI 1 I thought that there was a type in > the instructions. Both cables were okay so I don't know what the problem > might be. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Austin Franklin > Sent: Monday, September 09, 2002 3:33 PM > To: [EMAIL PROTECTED] > Subject: [filmscanners] RE: Which SCSI Card for SS4000 > > > Tom, > > > The input is a SCSI 1 cable (50 pin) the output (to another SCSI > > device) is > > 25 pin. > > I believe either can be used to connect to the SCSI card. > > Austin ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
