I would suggest a different tact. The Epson 3200 probably will not help improve your postcard scans, since they simply don't have more than about 200 dpi resolution themselves, so you can be sure a 800 or 1600 dpi scanner has picked up whatever they can offer. Also, reflective work is much easier to scan than transparent, especially dense items like slides.
The problem with almost all flatbed scanners is they are not really designed to scan transmissive work properly, even if they have both the resolution and proper illumination. For one thing, most scan through glass, and that doesn't work well with transmissive scanning. There is internal reflection, any dirt or defect in/on the glass, etc. gets picked up. Most dedicated film scanners scan at a more "realistic" 2400-4000 dpi or beyond than the quoted resolution from flatbed scanners. Film scanner only have to correctly scan a very small area, do so more slowly and precisely, and typically have better optics, better controlled light source, better designed film carriers, more accurate transports and better software for transmissive work. Unless you plan of selling the Epson 1600 and using the money toward your 3200, if you want better results with your slides (and I am assuming they are 35mm) I would strongly recommend you keep the Epson 1600 for your reflective work, and buy a dedicated slide scanner for your slides and negs. In today's market, the best value in scanners is probably the Minolta Dual Scan Dimage III, in a new scanner. It sells for $260-300 US, with 2820 dpi resolution, USB 2.0 interface, and reasonable software. It will provide you with superior images to anything the 3200 can provide for a 35 mm slide. There are quite a few reviews of this scanner to be found on the web. I suggest doing a Google search for opinions of users. It isn't perfect, but it probably is the best value today. Art malcolm wrote: > May I use this newsgroup to ask advice over a scanner purchase. > > I want a scanner which I use for scanning old postcards (1900-1920's), and > 35 mm colour slides. I use an Epson Perfection 1650. It does very well with > the postcards, but I am not so happy with the slide results. > > I am thinking of getting a new scanner. > > Either the Canoscan 9900 F (I use their cameras so I know that they know > their stuff with optics), or the Epson Perfection 3200. Can people tell me, > > 1) If they have either, good or bad points about it, > 2) The best settings and methods of scanning colour slides using these types > of scanners. > > Many thanks everyone > > Malcolm > > ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
