At 09:11 AM 1/15/2006, dhbailey wrote:
>enter that in the box on the right labeled Playback Note. Now set the
>staff position you want. The middle line is Staff Position 7, so
>calculate from there to the space you want -- immediately below the
>middle line is Staff Position 6, immediately above is Staff Position 8.
Actually, the middle line is 6. Above is 7, and below is 5.
>10) Now comes the heart-breaking aspect -- your carefully constructed
>percussion staff which you have just re-set may now look totally screwed
>up, and may well need to be reentered by hand.
If the notes were originally entered as treble A and C, and if you
follow the instructions in my other post (setting MIDI pitches A4 and
C5 to playback as 38), then everything should be fine. If the notes
were originally entered using two different pitches, then set up
*those* pitches to playback as 38 instead.
(This is where I differ from David Bailey when he writes "Pick a
note, any note, it doesn't matter". If you want to avoid re-entering
notes, you want to be sure to map the notes you actually entered
[like A4 and C5] to the note you want to playback [38].)
Aaron.
_______________________________________________
Finale mailing list
[email protected]
http://lists.shsu.edu/mailman/listinfo/finale
