On 26 Sep 2009 at 16:49, Aaron Sherber wrote: > On 9/26/2009 4:11 PM, David W. Fenton wrote: > > Or am I stuck doing this manually (ugh!)? > > I know this isn't what you were asking, but why is doing it manually so > tough? If you have a stopwatch and Excel, you can get the metronome > timings just by counting off a few beats and plugging the duration into > a formula.
Have you ever tried that? On 16 separate recordings? It's not nearly as easy as you think, and the result depends on which part of the piece you listen to (since tempos are not uniform from beginning to end). Right now as a preliminary step, I'm getting the timings of the tracks with the silence left out, and then using that to calculate the average tempo (since the number of beats is the same in all performances, at least for the complete ones -- that has turned out to be an eye-opener, as some of these light classical albums available for MP3 download on Amazon have truncated versions, with fade-outs at the end, even). But since tempos vary throughout the piece, sometimes by as much as 6- 10bpm, I will still need to go back and evaluate sections. If I had an automated way to do this, it would be *much* easier. What I envision would be a tool that would analyze the entire piece and show me points where the tempo has changed sufficient to be a new tempo (a nice tool would allow me to set the sensitivity of this detection), and would indicate somehow the average tempo in each of these sections. I'm beginning to suspect this is just something nobody else is interested in doing, so no one has created a plug-in to do it, and thus I'll be left doing it manually. *sigh* -- David W. Fenton http://dfenton.com David Fenton Associates http://dfenton.com/DFA/ _______________________________________________ Finale mailing list [email protected] http://lists.shsu.edu/mailman/listinfo/finale
