Yes, just delete the old, download the new and run :)
On Apr 19, 2005, at 5:11 PM, Brian O'Keefe wrote:
On Tuesday 19 April 2005 01:59 pm, you wrote:
Thanks Patrick,
I'll check out the imendio site and see if an older version is
available.
Would I just download it into my home directory, delete the newer
version and
run your instructions? I assume that my currently updated fink ported
pkgs
would work since you succeeded. In the meantime i look forward to your
next
instructions, though if the gnome gang doesn't update their end I'm
not sure
how you'll proceed.
Brian
Hmmm, yes I think that's it, if you have set PKG_CONFIG_PATH as said,
it should work...you might want to use a version on the imendio www
site instead of cvs (or fin any posted source for planner 12.9). Oh,
be
sure to do a fink selfupdate & update-all also :) [I deleted my 12.9
source or i'd happily make it available.] Planner is now at .13.x,
I'll probably get to installing the latest version in a month or
so....I'll post installation details then.
good luck :)
-- Patrick
On Apr 19, 2005, at 1:41 PM, Brian O'Keefe wrote:
Brian O'Keefe wrote:
you can
cp /usr/bin/libtool /usr/bin/libtool.bup
cp /sw/bin/glibtool /usr/bin/libtool
[be sure and restore the original after installing by
cp /usr/bin/libtool.bup /usr/bin/libtool ]
5. type as follows
cd planner
(How do I modify the following assuming that I get libtool into
the
/sw/bin directory?)
setenv PKG_CONFIG_PATH
"/usr/local/lib/pkgconfig:/sw/lib/pkgconfig"
setenv ACLOCAL_PATH "/usr/local/share/aclocal:/sw/share/aclocal"
do the above and both should work fine
good luck :)
Patrick
--------------------------------------------------------------------
--
--
Subject:
[Fink-beginners] Planner 12.90 on OSX
From:
"P.A.A." <[EMAIL PROTECTED]>
Date:
Tue, 8 Feb 2005 15:49:53 -0600
To:
Patrick Alessandra <[EMAIL PROTECTED]>
To:
Patrick Alessandra <[EMAIL PROTECTED]>
CC:
Planner Project Manager <[EMAIL PROTECTED]>, Planner Project
Manager - Development List <[EMAIL PROTECTED]>,
[email protected], Michael Goodman
<[EMAIL PROTECTED]>, [email protected]
Hey folks,
Alright, I just redid my Planner on OSX, it worked
(see beautiful screenshot at
http://www.geocities.com/adijedi/Planner.12.90_OSX.pdf)
and here's what worked:
1. Using Fink do a selfupdate and an update-all to make sure
everything is just such, also make sure you have gettext installed.
2. Open the terminal app and in preferences see what kind of shell
it creates (I use a tcsh shell, type /bin/tcsh & return if you need
to) make yourself root by typing "sudo -s" and entering your
password
& return.
3. get the latest planner from cvs, type as follows:
setenv CVSROOT ":pserver:[EMAIL PROTECTED]:/cvs/gnome"
cvs login
[press return for password]
cd ~
cvs co planner
4. I have installed libtool1.5 at /usr/bin/libtool.1.5, you can
also
usr /sw/bin/glibtool
[I know there are more elegant ways to do this, but it worked
this way so ...], type as follows:
cp /usr/bin/libtool /usr/bin/libtool.bup
cp /usr/bin/libtool.1.5 /usr/bin/libtool
5. type as follows
cd planner
setenv PKG_CONFIG_PATH
"/usr/local/lib/pkgconfig:/sw/lib/pkgconfig"
setenv ACLOCAL_PATH "/usr/local/share/aclocal:/sw/share/aclocal"
./autogen.sh --enable-python=no
6. restore Apple's libtool by typing as follows
cp /usr/bin/libtool.bup /usr/bin/libtool
7. type make
8. type make install
9. type /usr/local/bin/planner
worked :)
Since I keep Fink updated the whole thing took only about 30
minutes.
Cheers,
Patrick
Patrick,
I bit the bullet and went for the install and was excitedly watching
the configuration happen after step 5 (I hit enter after each line
which I hope was correct) and got the message:
Using $(sysconfdir)/gconf/schemas as install directory for schema
files
checking for
glib-2.0 >= 2.6.0
gobject-2.0 gmodule-2.0
gtk+-2.0 >= 2.6.0
libgnomecanvas-2.0 >= 2.10.0
libgnomeui-2.0 >= 2.10.0
libglade-2.0 >= 2.4.0
libgnomeprintui-2.2 >= 2.10.0
gnome-vfs-2.0 >= 2.10.0
gconf-2.0 >= 2.10.0
... Requested 'glib-2.0 >= 2.6.0' but version of GLib is 2.4.6
configure: error: Library requirements (
glib-2.0 >= 2.6.0
gobject-2.0 gmodule-2.0
gtk+-2.0 >= 2.6.0
libgnomecanvas-2.0 >= 2.10.0
libgnomeui-2.0 >= 2.10.0
libglade-2.0 >= 2.4.0
libgnomeprintui-2.2 >= 2.10.0
gnome-vfs-2.0 >= 2.10.0
gconf-2.0 >= 2.10.0
) not met; consider adjusting the PKG_CONFIG_PATH environment
variable
if your libraries are in a nonstandard prefix so pkg-config can find
them.
I also had to cd / to execute the 'cp /usr/bin.......' commands and
then back to '~' to 'cd planner' and run the rest. A small thing but
not immediately obvious to a rank newbie like myself.
So do you think that the current version of planner has been updated
to require the newer gnome pakgs described above? It would only make
sense as gnmoe is up to version 2.10 while fink is only up to 2.6. I
guess I'm stuck at this point until the gnome-core team gets more
current in the fink pkg area.
If you have any further suggestions please let me know.
Many thanks,
Brian
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI.
Version 11 adds new functionality designed to reduce time involved in
creating, integrating, and deploying reporting solutions. Free runtime info,
new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Fink-beginners mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/fink-beginners
