Thanks. Unfortunately it's not obvious what's causing the error to me. :-(
gcc4 is outdated, but by rights gcc42 _ought_ to work. Unfortunately, it takes me _days_ to test that, and I'd have to reboot to 10.4, too. In order to save you some time, do the following to get a binary from our unofficial repository: 1) Edit /sw/etc/apt/sources.list as a super-user and add the following line to it: deb http://fink.sodan.ecc.u-tokyo.ac.jp/apt/10.4 unstable main crypto 2) Run "sudo apt-get update" 3) Then try "fink install gcc42" (I may decide once I get time to push the newer netcdf over from our unstable tree. That one uses gcc43 to build--and I've looked briefly at an update for NCAR graphics, which appears to be somewhat complicated) On Apr 20, 2008, at 4:16 PM, Capehart, William J wrote: > Ok. .. Here they come for the final few steps of each:: > > From the gcc4 build failure: > > <snip> > gcc -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes > -Wmissing-prototypes -pedantic -Wno-long-long -Wno-variadic-macros - > Wold-style-definition -DHAVE_CONFIG_H -o cc1 \ > c-parse.o c-lang.o stub-objc.o attribs.o c-errors.o c-lex.o > c-pragma.o c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c- > opts.o c-format.o c-semantics.o c-incpath.o cppdefault.o c- > ppoutput.o c-cppbuiltin.o prefix.o c-objc-common.o c-dump.o c-pch.o > darwin-c.o rs6000-c.o c-gimplify.o tree-mudflap.o c-pretty-print.o > main.o libbackend.a ../libcpp/libcpp.a ../libcpp/libcpp.a ./../intl/ > libintl.a -liconv ../libiberty/libiberty.a > ### execution of /var/tmp/tmp.2.tgU2xD failed, exit code 2 > Removing runtime build-lock... > Removing build-lock package... > /sw/bin/dpkg-lockwait -r fink-buildlock-gcc4-4.0.2-3 > (Reading database ... 8707 files and directories currently installed.) > Removing fink-buildlock-gcc4-4.0.2-3 ... > Failed: phase compiling: gcc4-4.0.2-3 failed > > Before reporting any errors, please run "fink selfupdate" and > try again. If you continue to have issues, please check to see if the > FAQ on fink's website solves the problem. If not, ask on the fink- > users > or fink-beginners mailing lists, with a carbon copy to the maintainer: > > None <fink-devel@lists.sourceforge.net> > > Note that this is preferable to emailing the maintainer directly, > since > most fink package maintainers do not have access to all possible > hardware and software configurations. > > ------------------------------------------ > > For the final few lines of the gcc42 failure: > > > <snip> > /sw/src/fink.build/gcc42-4.2.2-1000/darwin_objdir/./prev-gcc/xgcc -B/ > sw/src/fink.build/gcc42-4.2.2-1000/darwin_objdir/./prev-gcc/ -B/sw/ > lib/gcc4.2/powerpc-apple-darwin8/bin/ -c -g -O2 -mdynamic-no-pic - > DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing- > prototypes -pedantic -Wno-long-long -Wno-variadic-macros -Wno- > overlength-strings -Wold-style-definition -Wmissing-format- > attribute -Wno-error -DHAVE_CONFIG_H -I. -I. -I../../gcc-4.2.2/gcc > -I../../gcc-4.2.2/gcc/. -I../../gcc-4.2.2/gcc/../include -I../../ > gcc-4.2.2/gcc/../libcpp/include -I/sw/include -I../../gcc-4.2.2/ > gcc/../libdecnumber -I../libdecnumber -I/sw/include ../../ > gcc-4.2.2/gcc/reload1.c -o reload1.o > ### execution of /var/tmp/tmp.1.YBfEcf failed, exit code 2 > Removing runtime build-lock... > Removing build-lock package... > /sw/bin/dpkg-lockwait -r fink-buildlock-gcc42-4.2.2-1000 > (Reading database ... 5782 files and directories currently installed.) > Removing fink-buildlock-gcc42-4.2.2-1000 ... > Failed: phase compiling: gcc42-4.2.2-1000 failed > > Before reporting any errors, please run "fink selfupdate" and > try again. If you continue to have issues, please check to see if the > FAQ on fink's website solves the problem. If not, ask on the fink- > users > or fink-beginners mailing lists, with a carbon copy to the maintainer: > > Jack Howarth <[EMAIL PROTECTED]> > > Note that this is preferable to emailing the maintainer directly, > since > most fink package maintainers do not have access to all possible > hardware and software configurations. > > > > > ================================================================ > Bill Capehart <[EMAIL PROTECTED]> Associate Professor > Institute of Atmospheric Sciences Land Surface Processes > 213 Mineral Industries Building Hydrometeorology > South Dakota School of Mines and Technology Ph: +1-605-394-1994 > 501 East Saint Joseph Street Fax: +1-605-394-6061 > Rapid City, SD 57701-3995 Mobile: +1-605-484-5692 > =================== http://capehart.sdsmt.edu ================== > > > > > -----Original Message----- > From: Alexander Hansen [mailto:[EMAIL PROTECTED] > Sent: Sun 20-Apr-08 09:41 > To: Capehart, William J > Cc: fink-devel@lists.sourceforge.net > Subject: Re: [Fink-devel] failing to build gcc42 or gcc4 on an older > PowerPC > > > On Apr 20, 2008, at 11:17 AM, Capehart, William J wrote: > > > Hi All: > > > > My attempts to build the gnu compilers: > > > > gcc4 (4.0.2-3) and > > gcc42 (42-4.2.2-1000) > > > > w/ Fink have met with failure (w/ fink commander, fink plain and > > fink plain as single user) > > > > My machine specs (yes, the machine's long in the tooth but still > > quite serviceable in most ways except in compiling gcc!) > > > > OS: Dawin 8.11.0 (Tiger 10.4.11) > > Processor: 500 MHz PowerPC G3 > > Memory: 1GB Ram (which is why it's still serviceable for most tasks) > > XCode: 2.5 > > > > While I've been able to get the G95 and G77 builds compiled/built/ > > working, I'd be nice to have the gfortran compilers too for work > > with netCDF and NCAR graphics (I'll likely need 5.0.0, not the > > currently available fink build) > > > > Any ideas or suggestions here (besides sticking to Linux or getting > > a new machine that runs leopard -- I'm fond of this little jalopy) > > > > Thanks Much > > Bill > > > > > > ================================================================ > > Bill Capehart <[EMAIL PROTECTED]> Associate Professor > > Institute of Atmospheric Sciences Land Surface Processes > > 213 Mineral Industries Building Hydrometeorology > > South Dakota School of Mines and Technology Ph: +1-605-394-1994 > > 501 East Saint Joseph Street Fax: +1-605-394-6061 > > Rapid City, SD 57701-3995 Mobile: +1-605-484-5692 > > =================== http://capehart.sdsmt.edu ================== > > > > > > > > > > We would need more specific information about the nature of the > failure, such as the last line the compiler tried to run, and the > error message you got afterward. > > > > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Fink-devel mailing list Fink-devel@lists.sourceforge.net http://news.gmane.org/gmane.os.apple.fink.devel
