Le 10 avr. 06 à 17:24, Alexander K. Hansen a écrit :
On 4/10/06, Martial Bret <[EMAIL PROTECTED]> wrote:You need to run a "fink selfupdate" with rsync or cvs updating enabled.Le 10 avr. 06 à 15:27, Alexander K. Hansen a écrit :On 4/10/06, Martial Bret <[EMAIL PROTECTED]> wrote:Le 10 avr. 06 à 14:47, Alexander K. Hansen a écrit :On 4/10/06, Martial Bret <[EMAIL PROTECTED]> wrote:Hello,I have some problems to remove this package (through dselect). Somefiles are missing, but I don't know why : --- The following packages will be REMOVED: auctex emacs21 0 packages upgraded, 0 newly installed, 2 to remove and 0 not upgraded. 2 packages not fully installed or removed. Need to get 0B of archives. After unpacking 108MB will be freed. Do you want to continue? [Y/n] (Lecture de la base de donn?es... 83126 fichiers et r?pertoires d?j? install?s.) Suppression de auctex .../sw/var/lib/dpkg/info/auctex.prerm: line 6: /sw/lib/emacsen- common/emacs-package-remove: No such file or directory /sw/bin/dpkg : erreur de traitement de auctex (--remove) : le sous-processus pre-removal script a retourn? une erreur de sortie d'?tat 1 /sw/var/lib/dpkg/info/auctex.postinst: line 6: /sw/lib/emacsen- common/ emacs-package-install: No such file or directory dpkg : erreur lors du nettoyage :le sous-processus post-installation script a retourn? une erreur desortie d'?tat 1 Suppression de emacs21 ... install-info(emacs-21/ada-mode): no entry for file `emacs-21/ada- mode'. install-info(emacs-21/autotype): no entry for file `emacs-21/ autotype'.install-info(emacs-21/ccmode): no entry for file `emacs-21/ ccmode'.install-info(emacs-21/cl): no entry for file `emacs-21/cl'. install-info(emacs-21/dired-x): no entry for file `emacs-21/ dired-x'. install-info(emacs-21/ebrowse): no entry for file `emacs-21/ ebrowse'. install-info(emacs-21/ediff): no entry for file `emacs-21/ediff'. install-info(emacs-21/efaq): no entry for file `emacs-21/efaq'. install-info(emacs-21/emacs): no entry for file `emacs-21/emacs'. install-info(emacs-21/emacs-mime): no entry for file `emacs-21/ emacs- mime'.install-info(emacs-21/eshell): no entry for file `emacs-21/ eshell'.install-info(emacs-21/eudc): no entry for file `emacs-21/eudc'. install-info(emacs-21/forms): no entry for file `emacs-21/forms'. install-info(emacs-21/gnus): no entry for file `emacs-21/gnus'. install-info(emacs-21/idlwave): no entry for file `emacs-21/ idlwave'. install-info(emacs-21/info): no entry for file `emacs-21/info'. install-info(emacs-21/message): no entry for file `emacs-21/ message'. install-info(emacs-21/mh-e): no entry for file `emacs-21/mh-e'. install-info(emacs-21/pcl-cvs): no entry for file `emacs-21/pcl- cvs'.install-info(emacs-21/reftex): no entry for file `emacs-21/ reftex'.install-info(emacs-21/sc): no entry for file `emacs-21/sc'. install-info(emacs-21/speedbar): no entry for file `emacs-21/ speedbar'. install-info(emacs-21/vip): no entry for file `emacs-21/vip'. install-info(emacs-21/viper): no entry for file `emacs-21/viper'.install-info(emacs-21/widget): no entry for file `emacs-21/ widget'.install-info(emacs-21/woman): no entry for file `emacs-21/woman'. /sw/var/lib/dpkg/info/emacs21.prerm: line 21: /sw/lib/emacsen- common/ emacs-remove: No such file or directory /sw/bin/dpkg : erreur de traitement de emacs21 (--remove) : le sous-processus pre-removal script a retourn? une erreur de sortie d'?tat 1 Des erreurs ont ?t? rencontr?es pendant l'ex?cution : auctex emacs21 E: Sub-process /sw/bin/dpkg returned an error code (1) Some errors occurred while unpacking. I'm going to configure the packages that were installed. This may result in duplicate errors or errors caused by missing dependencies. This is OK, only the errorsabove this message are important. Please fix them and run [I] nstallagain Press enter to continue. --- Regards, Martial Bret.Unfortunately, it appears that you have installed a version of the emacsen-commen package that has been causing problems. Try the workaround posted in http://article.gmane.org/gmane.os.apple.fink.general/19715/ match=maccallum+emacs -- Alexander K. HansenThanks for your answer, nevertheless, this action didn't fix the problem which remains the same. Regards, Martial Bret.What version is your emacsen-common? If it's not 1.4.15-3 then try updating it.My version of emacsen-common is 1.4.13-2 (binary package), I try to remove it and install from source (1.4.15-3), but it keep on installing the version 1.4.13-2 : --- cyberbarrieu:/sw/etc martus$ fink install emacsen-common Information about 1819 packages read in 5 seconds. The following package will be installed or updated: emacsen-common gzip -dc /sw/src/emacsen-common_1.4.13.tar.gz | /sw/bin/tar -xf - -- no-same-owner --no-same-permissions --- I tried to remove /sw/src/emacsen-common_1.4.13.tar.gz and to reinstall, but then it download the same version : --- The following package will be reinstalled: emacsen-common curl -f -L -O http://distfiles.bru.be.eu.finkmirrors.net/emacsen- common_1.4.13.tar.gz --- A problem my my mirror ? Regards, Martial Bret.
Ok, but I get the following errors when doing it (it's another problem I think, sorry) :
--- cyberbarrieu:~ martus$ fink selfupdate Password:rsync -az -q rsync://bru.be.eu.finkmirrors.net/finkinfo//TIMESTAMP / sw/fink/TIMESTAMP.tmp I will now run the rsync command to retrieve the latest package descriptions. /usr/bin/su martus -c "rsync -rtz --delete-after --delete -q -- include='10.4-transitional/' --include='10.4-transitional/stable/' -- include='10.4-transitional/stable/main/' --include='10.4-transitional/ stable/main/finkinfo/' --include='10.4-transitional/stable/main/ finkinfo/*/' --include='10.4-transitional/stable/main/finkinfo/*' -- include='10.4-transitional/stable/main/finkinfo/**/*' --include='10.4- transitional/' --include='10.4-transitional/stable/' --include='10.4- transitional/stable/crypto/' --include='10.4-transitional/stable/ crypto/finkinfo/' --include='10.4-transitional/stable/crypto/finkinfo/ */' --include='10.4-transitional/stable/crypto/finkinfo/*' -- include='10.4-transitional/stable/crypto/finkinfo/**/*' -- include='VERSION' --include='DISTRIBUTION' --include='README' -- exclude='**' 'rsync://bru.be.eu.finkmirrors.net/finkinfo' '/sw/fink/'" mkstemp 10.4-transitional/stable/crypto/finkinfo/.apache2- ssl.info.pMcayC failed: Permission denied mkstemp 10.4-transitional/stable/crypto/finkinfo/.apache2- ssl.patch.wIiN67 failed: Permission denied mkstemp 10.4-transitional/stable/crypto/finkinfo/.apr-ssl.info.jkVXQg failed: Permission denied
... ... --- Regards, Martial Bret. ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 _______________________________________________ Fink-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/fink-users
