Martin Costabel wrote:
> Alexander Hansen wrote:
>> Jean-François Mertens wrote:
> []
>> I've got a #include <sys/signal.h> line in /usr/include/signal.h on both
>> of my systems (3.1 and 3.1.1).
>
> The logic behind this bug is a little complicated. The result of the
> analysis below is that the culprit is...
>
>   xquartz version >= 2.3.0.
>
> My guess is therefore that on those machines where xdvi does not
> build, such a version of xquartz is installed. A possible workaround
> is described at the end of this message.
>
> Here is the story:
>
> The file /usr/include/sys/signal.h, which is needed for the definition
> of NSIG, is in fact included, but too early. Not from
> /usr/include/signal.h, but from /usr/include/sys/wait.h, included from
> /usr/include/stdlib.h. Then when /usr/include/signal.h tries to load
> it again, it is not read, because it protects itself from being
> included multiple times.
>
> Normally the time when a header file is read shouldn't matter, but
> here it does: Both the definition of NSIG and its use are conditional,
> namely inside a
>
> #if !defined(_ANSI_SOURCE) && (!defined(_POSIX_C_SOURCE) ||
> defined(_DARWIN_C_SOURCE))
>
> clause. And between the time when /usr/include/sys/signal.h is loaded
> and when it is used, the conditions change: The file
>
> /usr/include/X11/Xosdefs.h
>
> is loaded, and in its xquartz (>=2.3.0) version, it contains the lines
>
> #if defined(_XOPEN_SOURCE) || defined(_POSIX_SOURCE) ||
> defined(_POSIX_C_SOURCE)
> #define _DARWIN_C_SOURCE
> #endif
>
> The final straw is that xdvi.h #defines _XOPEN_SOURCE before including
> <X11/Xosdefs.h>. Threfore _DARWIN_C_SOURCE is defined, therefore the
> #if clause is executed the second time, but not the first time.
>
> The result of this analysis is that the culprit is the new version of
> <X11/Xosdefs.h>.
>
> A workaround would be to define the variable _DARWIN_C_SOURCE on the
> compiler line. This will result in a repeated warning about a
> redefinition of this macro, but the compilation goes through. In the
> xdvi.info file, it suffices to have the line
>
> SetCFLAGS: -O2 -D_DARWIN_C_SOURCE
>
Ah.  I had Xquartz 2.3.0 on the machine where it built, but I didn't
reinstall it after the system's update, so that might account for my
unexpected success.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Fink-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/fink-users

Reply via email to