On Nov 29, 2008, at 1:43 PM, Trevor Harmon wrote: > On Nov 29, 2008, at 1:30 PM, David R. Morrison wrote: > >> You need to run "fink selfupdate-rsync" rather than "fink >> selfupdate". > > Thanks, but even with selfupdate-rsync, I'm still getting File Not > Found errors and "WARNING: Failure while updating indexes." > > Here's the exact sequence of steps I'm following: > > 1. Wipe out the previous Fink installation with "sudo rm -rf /sw" > 2. Run Fink 0.9.0 Binary Installer for Intel (I'm on a MacBook Pro > with OS X 10.5.5) > 3. Run "fink selfupdate" > 4. Run "fink configure", leaving all options at the default except the > one about unstable > 5. Run "fink selfupdate-rsync" > > I've pasted below a log showing some of the errors I get in step 5. > > Am I still doing something wrong? Thanks, > > Trevor > > > > ~/Desktop$ fink selfupdate-rsync > > Please note: the command 'fink selfupdate' should be used for > routine updating; you only need to use 'fink selfupdate-cvs' or 'fink > selfupdate-rsync' if you > are changing your update method. > > The current selfupdate method is point. Do you wish to change the > default selfupdate method to rsync? [Y/n] > rsync -az -q rsync://distfiles.master.finkmirrors.net/finkinfo// > TIMESTAMP /sw/fink/TIMESTAMP.tmp > I will now run the rsync command to retrieve the latest package > descriptions. > rsync -rtz --delete-after --delete -q --include='10.4/' -- > include='10.4/stable/' --include='10.4/stable/main/' --include='10.4/ > stable/main/finkinfo/' --include='10.4/stable/main/finkinfo/*/' -- > include='10.4/stable/main/finkinfo/*' --include='10.4/stable/main/ > finkinfo/**/*' --include='10.4/' --include='10.4/stable/' -- > include='10.4/stable/crypto/' --include='10.4/stable/crypto/finkinfo/' > --include='10.4/stable/crypto/finkinfo/*/' --include='10.4/stable/ > crypto/finkinfo/*' --include='10.4/stable/crypto/finkinfo/**/*' -- > include='10.4/' --include='10.4/unstable/' --include='10.4/unstable/ > main/' --include='10.4/unstable/main/finkinfo/' --include='10.4/ > unstable/main/finkinfo/*/' --include='10.4/unstable/main/finkinfo/*' > -- > include='10.4/unstable/main/finkinfo/**/*' --include='10.4/' -- > include='10.4/unstable/' --include='10.4/unstable/crypto/' -- > include='10.4/unstable/crypto/finkinfo/' --include='10.4/unstable/ > crypto/finkinfo/*/' --include='10.4/unstable/crypto/finkinfo/*' -- > include='10.4/unstable/crypto/finkinfo/**/*' --include='VERSION' -- > include='DISTRIBUTION' --include='README' --exclude='**' 'rsync:// > distfiles.master.finkmirrors.net/finkinfo' '/sw/fink/' > /usr/bin/find '/sw/fink/10.4/stable/main' -name CVS -type d -print0 | > xargs -0 /bin/rm -rf > /usr/bin/find '/sw/fink/10.4/stable/crypto' -name CVS -type d -print0 > | xargs -0 /bin/rm -rf > /usr/bin/find '/sw/fink/10.4/unstable/main' -name CVS -type d -print0 > | xargs -0 /bin/rm -rf > /usr/bin/find '/sw/fink/10.4/unstable/crypto' -name CVS -type d - > print0 | xargs -0 /bin/rm -rf > Downloading the indexes of available packages in the binary > distribution. > /sw/bin/apt-get-lockwait -q update > Err file: unstable/main Packages > File not found > Ign file: unstable/main Release > Err file: unstable/crypto Packages > File not found > Ign file: unstable/crypto Release > Hit http://bindist.finkmirrors.net 10.5/release/main Packages > Hit http://bindist.finkmirrors.net 10.5/release/main Release > Hit http://bindist.finkmirrors.net 10.5/release/crypto Packages > Hit http://bindist.finkmirrors.net 10.5/release/crypto Release > Hit http://bindist.finkmirrors.net 10.5/current/main Packages > Hit http://bindist.finkmirrors.net 10.5/current/main Release > Hit http://bindist.finkmirrors.net 10.5/current/crypto Packages > Hit http://bindist.finkmirrors.net 10.5/current/crypto Release > Failed to fetch file:/sw/fink/dists/unstable/main/binary-darwin-i386/ > Packages File not found > Failed to fetch file:/sw/fink/dists/unstable/crypto/binary-darwin- > i386/ > Packages File not found > Reading Package Lists... > Building Dependency Tree... > W: Couldn't stat source package list file: unstable/main Packages (/ > sw/ > var/lib/apt/lists/_sw_fink_dists_unstable_main_binary-darwin- > i386_Packages) - stat (2 No such file or directory) > W: Couldn't stat source package list file: unstable/crypto Packages (/ > sw/var/lib/apt/lists/_sw_fink_dists_unstable_crypto_binary-darwin- > i386_Packages) - stat (2 No such file or directory) > W: Couldn't stat source package list file: unstable/main Packages (/ > sw/ > var/lib/apt/lists/_sw_fink_dists_unstable_main_binary-darwin- > i386_Packages) - stat (2 No such file or directory) > W: Couldn't stat source package list file: unstable/crypto Packages (/ > sw/var/lib/apt/lists/_sw_fink_dists_unstable_crypto_binary-darwin- > i386_Packages) - stat (2 No such file or directory) > W: You may want to run apt-get update to correct these problems > E: Some index files failed to download, they have been ignored, or old > ones used instead. > ### execution of /sw/bin/apt-get-lockwait failed, exit code 100 > WARNING: Failure while updating indexes. > . > . > . >
Solve this via "fink scanpackages", which will generate the Packages.gz files apt-get is looking for. These errors aren't really important operationally and wouldn't interfere with anything: they show up because the unstable trees are mapped over to apt-get to look for packages, but they aren't initialized yet. ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Fink-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/fink-users
