Raptor is not certified with NT SP6anything, so go back to SP5+hotfixes and
you shouldn't have any problems. They had to release a new version, 6.01,
to work with SP5, so I'm assuming there will be another new version that
will work with SP6a.
Remote Log is installed with Raptor 6 in \raptor\firewall\bin on NT. Check
page 9-16 of the Raptor reference guide for more information.
John Monahan
Network Administrator
Liberty Diversified Industries
(612) 536-6677
"Enno Rey"
<[EMAIL PROTECTED] To: <[EMAIL PROTECTED]>
elberg.de> cc:
Sent by: Subject: Problems with Raptor
6/NT
firewalls-owner@lists
.gnac.net
01/03/00 02:28 PM
Hi to all and a happy new year,
since I never got any response to my questions I try again, hoping that
only those days prevented you from answering... ;-)
Is anybody here who got outbound SMTP via Raptor 6/NT (SP 6a + some patches
+ Raptor patch 6.02) to work?
I tried the whole night from internal Exchange 5.5, from internal sendmail
8.7.6, via direct access from Outlook, directly telnetting to port 25
internal interface or port 25 at MX outside the firewall, disabling ESMTP
on Exchange and whatever.
I called Axent tech support (they gave me a case number...), searched up 'n
down the Internet.
I sniffed round the firewall: SMTP connections to firewall don't seem to
get any further than TCP handshake, but on the outside I see DNS traffic
for
resolving MX for mail addresses from internal queue ... strange!
For testing purposes, I even allowed 'universe to universe SMTP' (don't
blame me, being desperate) - nothing!
Messages to internal mailers alike 'service not provided to you', logs on
firewall indicated something like 'x.x.x trying non-transparent access' (so
I enabled various forms of transparency) or 'timeout: x.x.x didn't respond
to startup command' (I don't know any SMTP 'startup' command, do you?).
I ended up with redirecting ports to mailer outside firewall. That worked.
But then I don't need 'high-end' SMTP-proxy. And then I have to configure
outside mailer to relay generously...
I remember somebody talking about outbound SMTP from sendmail via Raptor
during discussion about FW-1/Exchange coexistence.
Could you please give me details about your configuration?
Or does anybody else have any idea?
And there's another problem: logging.
The logs should be read & extracted for accounting purposes on another box
behind the firewall, but the tool normally responsible for this - REMOTELOG
- no more exists.
Sure, I could move the logs manually to the other box, but then I had to
use/open NBT.
Any ideas where to get REMOTELOG for Raptor 6 or something equivalent or
any other solution for this?
Thanks a lot in advance,
Enno Rey
[EMAIL PROTECTED]
PGP: FB9B DA6D 6706 5A8D A361 F63C 6650 E4C8 3BBE 04E9
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
