Thanks for the reply
But I do have that set up correctly.
The strange thing is , I can ping from this machine to outside world; but
nobody else can ping it.
I am getting out of things to try now!!
Appreciate the help
ameet
----- Original Message -----
From: Marc Renner <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, February 23, 2000 12:37 PM
Subject: Re: PIX stat translation not working
> You need the conduit statement to point to the OUTSIDE Translated Address
i.e.,:
>
> conduit permit tcp host <OUTSIDE TRANSLATED ADDRESS> eq smtp any
>
> Also: Make sure you have an MX (Mail eXchange) record for the mail servers
OUTSIDE TRANSLATED ADDRESS.
>
> cheers..
>
>
> Marc..
>
> >>> "Alessandra Moura" <[EMAIL PROTECTED]> 02/23/00 09:13AM >>>
>
> Try this:
>
> conduit permit tcp host <valid IP> eq smtp any
>
>
>
>
> 23/02/2000 09:58
> "Ameet Chaubal" <[EMAIL PROTECTED]>
>
> From:
> On:
>
>
>
>
> To: [EMAIL PROTECTED]
>
> cc: (bcc: Alessandra Moura/RIO/ANP)
>
>
>
> Subject: PIX stat translation not working
>
>
>
>
>
>
> Hi all
>
> I am a bit new to pix firewall . The version we have is 4.2
> It is a fairly simple setup without dmz.
> we have a pool of global ip addersses and just one entry for static NAT.
> I have conduit permit icmp any any command in it.
> I also have the conduit permit for the static address at port 25 for smtp.
> The machines inside can go out thr' dynamic NAT fine. I can even ping them
> from outside.
> But the problem is for the static translated machine.
> This machine can go out and ping anybody on the internet.
> But nobody outside seems to be able to see it or ping it. Even telnet at
25
> does not work.
> I checked everything that I could; there are no outbound access lists.
> Does fixup have anything to do with this.?
> Could anybody please suggest something?
>
> Thanks a lot
>
> ameet
>
> -
> [To unsubscribe, send mail to [EMAIL PROTECTED] with
> "unsubscribe firewalls" in the body of the message.]
>
>
>
> -
> [To unsubscribe, send mail to [EMAIL PROTECTED] with
> "unsubscribe firewalls" in the body of the message.]
>
> -
> [To unsubscribe, send mail to [EMAIL PROTECTED] with
> "unsubscribe firewalls" in the body of the message.]
>
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
