I have a CP FW-1 box (Solaris 2.6 FW-1 4.1) that I had to migrate from one set of IP address to a new set (and all other systems involved). I re-did my licenses and every thing comes up fine except (there is always an except) my new gui-client (internal network) can not connect when the firewall is started. He was added as a gui client and can connect when just running fwm. I have a rule to allow any service from my client to the firewall but it does not seem to work. When running just fwm I can connect and change rules but when trying to upload rules they will upload but not insert (presumably because the fw itself is not running).I disabled all rules concerning dropping packets to the firewall and I am still having problems. All ip address were replaced with the new ones on all network objects. FW-1 is brand new to me and I am a bit stumped. If anybody has a source for a solid doc on configuring FW-1 and/or a doc dealing with the proper configuring of the ruleset I would greatly appreciate it. Any extra hints, tips and gotchas I should be aware of would also welcome. All of the docs I have found so far have been incomplete. Thanks, Michael DeSimone - [To unsubscribe, send mail to [EMAIL PROTECTED] with "unsubscribe firewalls" in the body of the message.]
