(Resolution 1764 in the Nokia IPRG Knowledge Base at
http://support.iprg.nokia.com
has useful info.)
If you have a VPN210 system, then
you have an IP330 platform.
If there is no IPSO operating system, you might
very well be left at the boot manager prompt. However,
this is not conclusive. It is possible that the auto boot setting
has been turned off. Do you see the following prompt?:
BOOTMGR[0]>
This can happen if you upgraded the boot manager in anticipation
to upgrading the OS, and did not follow the instructions that are
in the release notes.
Enter the following command at the boot manager prompt:
BOOTMGR[0]>set-defaults <CR>
To be sure, execute the following to display the current settings
BOOTMGR[1]>printenv <CR>
If you see that the value for autoboot is set to no, then
enter the following command:
BOOTMGR[2]setenv autoboot yes <CR>
Then, enter "boot" at the prompt to continue booting off of the disk.
If you truly do have a corrupted disk, then you will need to reinstall
IPSO from an FTP server. In this case, you would enter "install" at the
boot manager prompt and follow the prompts.
--- Jerald Josephs
----- Original Message -----
From: Davide Zari <[EMAIL PROTECTED]>
To: Firewall list <[EMAIL PROTECTED]>
Sent: Tuesday, March 28, 2000 11:25 AM
Subject: NOKIA VPN210 recover
> Hello, I'm new on the list.
>
> I have now the problem of recovering a VPN210 (without floppy) from the
> erase of
> IPSO.
>
> Now the only prompt is from IPSO Boot, no kernel or oter elements of
> system are avaible.I think I can't use the Voyager Backup and Restore
> feature, because I'can't login and configure the interfaces.
>
> It's a possibility to boot via TFTP? How I can go to Boot Manager? Boot
> Manager are demanded to upgrade IPSO, and the file ipso.tgz is on HD
> (but ther isn't a system to mount a file system....)
>
> Thanks for any help,
>
> DAVIDE
>
> --
> =========================================
> Davide Zari
> Security Consultant - Customer Connect
> Cybernet ITA S.p.A.
> Viale Verona, 168 - 38100 Trento - ITALY
> Phone :+39 461 373111
> Fax :+39 461 373110
> =========================================
>
>
> -
> [To unsubscribe, send mail to [EMAIL PROTECTED] with
> "unsubscribe firewalls" in the body of the message.]
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
