Yes I have heard of Shomiti. In fact their hardware is recommended for
use as a tap for ethernet sniffing by many other developers and
distributors. Thank you for all your help.
TA.
> ----------
> From: Frank Darden
> Sent: 22 June 2000 20:58
> To: '[EMAIL PROTECTED]'; [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: RE: Ethernet Sniffing
>
> Sounds like this listener is actually looking for a shomiti ethernet
> tap.
> They are available from www.shomiti.com and the product is called a
> century
> tap.They are great for FDX ethernet sniffing, basically allows you to
> tap
> send on one port, and receive on the other. I dont know of anyone else
> that
> makes these taps. We keep a bunch around here, and use them often.
>
> Frank
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, June 22, 2000 2:59 AM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: RE: Ethernet Sniffing
>
>
> Hmm,
> Ok stating the obvious. Perhaps I was not clear in my
> description. Parhaps what I should have said was a "passive ethernet
> tap".
>
> TA.
>
> > ----------
> > From: Lee, Dana-Renee
> > Sent: 21 June 2000 17:08
> > To: '[EMAIL PROTECTED]'; [EMAIL PROTECTED]
> > Cc: [EMAIL PROTECTED]
> > Subject: RE: Ethernet Sniffing
> >
> > I believe what you need is a hub.
> >
> > Renee lee
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, June 21, 2000 9:15 AM
> > To: [EMAIL PROTECTED]
> > Cc: [EMAIL PROTECTED]
> > Subject: Re: Ethernet Sniffing
> >
> >
> > Here is a great site for schematics:
> > http://www.seymourduncan.com/schematics.html. An d here is another
> > site
> > that accomplishes what your trying to do, complete with schematics
> and
> > support code..
> >
> > ciao,
> >
> > Jennifer
> >
> > [EMAIL PROTECTED] wrote:
> >
> > > Dear Guys,
> > > I have been looking at making up my own Ethernet tap /
> > Ethernet
> > > Splitter. I have had a couple of fudged goes at it using bread
> board
> > but
> > > with no success. Does anyone know where I would be able to get
> hold
> > of
> > > some schematics for building an Ethernet Tap?
> > >
> > > Cheers,Liam.
> > > Thomas Liam Romanis
> > > Technical Manager
> > > Portcullis Computer Security Ltd
> > > Telephone: 0208-868-0098
> > > Fax: 0208-868-0017
> > >
> > > -
> > > [To unsubscribe, send mail to [EMAIL PROTECTED] with
> > > "unsubscribe firewalls" in the body of the message.]
> >
> > -
> > [To unsubscribe, send mail to [EMAIL PROTECTED] with
> > "unsubscribe firewalls" in the body of the message.]
> > -
> > [To unsubscribe, send mail to [EMAIL PROTECTED] with
> > "unsubscribe firewalls" in the body of the message.]
> >
> -
> [To unsubscribe, send mail to [EMAIL PROTECTED] with
> "unsubscribe firewalls" in the body of the message.]
>
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
