I have a diagram below. I need your answer so that I will know if I am doing
it right.
MY THOUGHTS:
1. I don't need to add a route to 172.22.1.0 and 172.25.22.0 on the router
since this will be taken care by NAT function of the firewall.
2. I need to add a default route on the firewall and that the gateway should
be set to 172.26.22.1.
3. The gateway ip address of workstations on the internal network should be
set to 172.22.1.1.
4. The gateway ip address of servers on the dmz network should be set to
172.25.22.1.
ws1 ws2
172.22.1.16/26 172.22.1.17/26
| |
| |
`-------------'
|
|
| internal network
|
|172.22.1.1/26
.-------.
| | .----WinNT 4
| fire- | dmz | 172.25.22.11/26
| wall |-------------------|
| |172.25.22.1/26 |
| | `----WinNT 4
`-------' 172.25.22.12/26
| 172.26.22.2/26
|
| untrusted network
|
|e0=172.26.22.1/26
router
|
|
v
internet
Did I miss anything?
Thanks in advance and any help would greatly be appreciated.
Ronneil
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
