You can also use SSH (v1) from an outside interface to connect directly
to the Cisco PIX in later releases of 5 (e.g. 5.2(3)) if you configure it.
- H. Morrow Long
Don Hickey wrote:
>
> >From what I understand, the newer versions of the Pix Software will allow
> you to telnet to the outside interface if you are using IPSec. This was from
> the 5.0 manual
>
> Don Hickey
>
> ----- Original Message -----
> From: "Scott Langendorf" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, February 05, 2001 11:33 AM
> Subject: Question about PIX firewall remote administration
>
> > I'm spec-ing a firewall for use in remote locations with administration
> via
> > the internet. A friend told me that back in '97 when he worked on the PIX,
> > there was no way to administer it unless you were on the inside interface.
> > Is this configurable, or has this changed?
> >
> > I want to be able to set it for administration from a static subnet or IP
> > address on the outside interface (internet side).
> >
> > Thanks
> >
> > Scott Langendorf
> > Sharemedia
> > Director of IT
> > 301/947-8997
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
